On Tue, Jul 14, 2015 at 12:26 PM, Daniel Kurtz <djkurtz@xxxxxxxxxxxx> wrote: > On Mon, Jul 13, 2015 at 5:32 PM, Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx> wrote: >> From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx> >> >> Add device node to enable GPT timer. This timer will be >> used as sched clock source. >> >> Signed-off-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx> >> Signed-off-by: Eddie Huang <eddie.huang@xxxxxxxxxxxx> >> Signed-off-by: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx> > > This binding needs documentation. Whoops. I just found it at: Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt > >> --- >> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi >> index 0696f8f..04bdd8f 100644 >> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi >> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi >> @@ -219,6 +219,15 @@ >> reg = <0 0x10007000 0 0x100>; >> }; >> >> + timer: timer@10008000 { >> + compatible = "mediatek,mt8173-timer", >> + "mediatek,mt6577-timer"; >> + reg = <0 0x10008000 0 0x1000>; >> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>; >> + clocks = <&infracfg CLK_INFRA_CLK_13M>, >> + <&topckgen CLK_TOP_RTC_SEL>; > > Why two clocks? The driver only uses one. > Please use a clock-names property. > > Thanks, > -Dan > >> + }; >> + >> pwrap: pwrap@1000d000 { >> compatible = "mediatek,mt8173-pwrap"; >> reg = <0 0x1000d000 0 0x1000>; >> -- >> 1.8.1.1.dirty >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html