Hello Krzysztof, Thanks a lot for the feedback. On 07/13/2015 09:53 AM, Krzysztof Kozlowski wrote: > On 13.07.2015 16:42, Javier Martinez Canillas wrote: >> The MAX77802 is a chip that contains regulators, 2 32kHz clocks, >> a RTC and an I2C interface to program the individual components. >> >> The are already DT bindings for the regulators and clocks and >> these reference to a bindings/mfd/max77802.txt file, that didn't >> exist, for the details about the PMIC. >> >> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> >> --- >> >> Documentation/devicetree/bindings/mfd/max77802.txt | 26 ++++++++++++++++++++++ >> 1 file changed, 26 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt > > I wonder what happened with previous email... > http://www.spinics.net/lists/kernel/msg1784726.html > The story is that in v9 I split the series to add the max77802 clock and regulators support as different series to avoid the cross subsystem churn: [PATCH v9 0/6] Add Maxim 77802 clocks support https://lwn.net/Articles/608834/ [PATCH v9 0/2] Add Maxim 77802 regulator support https://lkml.org/lkml/2014/8/18/71 But then forgot to add the common DT binding for the PMIC in bindings/mfd... >> >> diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt >> new file mode 100644 >> index 000000000000..875ebebbc5b0 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/max77802.txt >> @@ -0,0 +1,26 @@ >> +Maxim MAX77802 multi-function device >> + >> +The Maxim MAX77802 is a power management chip (PMIC) that contains 10 high >> +efficiency Buck regulators, 32 Low-dropout (LDO) regulators used to power >> +up application processors and peripherals, a 2-channel 32kHz clock outputs, >> +a Real-Time-Clock (RTC) and a I2C interface to program the individual >> +regulators, clocks outputs and the RTC. >> + >> +Binding for the built-in 32k clock generator block is defined separately >> +in the bindings/clk/maxim,max77802.txt file and binding for the regulators >> +is defined in the bindings/regulator/max77802.txt file. >> + >> +Required properties: >> +- compatible : Must be "maxim,max77686"; > > Shouldn't this be 77802? > right, thanks for pointing out this. It is a copy & paste error. I'll wait a couple of days for more feedback and re-post. > Best regards, > Krzysztof > Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
