From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Document the necessary device-tree bindings of the spi-bcm2835aux driver.
Signed-off-by: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
---
.../bindings/spi/brcm,bcm2835-aux-spi.txt | 46 ++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
Changelog:
V1->V2: fixed typo
added cs-gpios
V2->V3: added reference to spi-bus in cs-gpios
added required additional config for syscon
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
new file mode 100644
index 0000000..ce5f3be
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
@@ -0,0 +1,46 @@
+Broadcom BCM2835 auxiliar SPI1/2 controller
+
+The BCM2835 contains two forms of SPI master controller, one known simply as
+SPI0, and the other known as the "Universal SPI Master"; part of the
+auxiliary block. This binding applies to the SPI1/2 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux-spi".
+- reg: Should contain register location and length for the spi block
+ as well as for the common aux block control
+- interrupts: Should contain shared interrupt of the aux block
+- clocks: The clock feeding the SPI controller.
+- cs-gpios: the cs-gpios (native cs is NOT supported)
+ see also spi-bus.txt
+- syscon: the syscon config entry to handle the shared
+ register access by multiple drivers
+
+Example:
+
+spi1@7e215080 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e215080 0x40>;
+ interrupts = <1 29>;
+ clocks = <&clk_spi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>;
+ syscon = <&aux_syscon>;
+};
+
+spi2@7e2150c0 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e2150c0 0x40>;
+ interrupts = <1 29>;
+ clocks = <&clk_spi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>;
+ syscon = <&aux_syscon>;
+};
+
+/* the necessary syscon config referenced above */
+aux_syscon: aux_syscon@0x7e215000 {
+ compatible = "syscon";
+ reg = <0x7e215000 0x08>;
+};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
