This patch set adds a clk driver for the low power clocks found in the CREG block on lpc18xx. CREG is a collection of miscellaneous configuration registers that can be accessed through a syscon regmap interface. The clk driver makes it possible to setup and enabled these two clocks. This need to support peripherals like the internal RTC on the lpc18xx platform. Based on v4.2-rc1. Joachim Eastwood (2): clk: add lpc18xx creg clk driver doc: dt: add documentation for lpc1850-creg-clk driver .../devicetree/bindings/clock/lpc1850-creg-clk.txt | 52 +++++++ drivers/clk/nxp/Makefile | 1 + drivers/clk/nxp/clk-lpc18xx-creg.c | 173 +++++++++++++++++++++ 3 files changed, 226 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt create mode 100644 drivers/clk/nxp/clk-lpc18xx-creg.c -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html