Re: [PATCH v6 1/4] drm/layerscape: Add Freescale DCU DRM driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Jul 10, 2015 at 03:26:52PM +0800, Jianwei Wang wrote:
> This patch add support for Two Dimensional Animation and Compositing
> Engine (2D-ACE) on the Freescale SoCs.
> 
> 2D-ACE is a Freescale display controller. 2D-ACE describes
> the functionality of the module extremely well its name is a value
> that cannot be used as a token in programming languages.
> Instead the valid token "DCU" is used to tag the register names and
> function names.
> 
> The Display Controller Unit (DCU) module is a system master that
> fetches graphics stored in internal or external memory and displays
> them on a TFT LCD panel. A wide range of panel sizes is supported
> and the timing of the interface signals is highly configurable.
> Graphics are read directly from memory and then blended in real-time,
> which allows for dynamic content creation with minimal CPU
> intervention.
> 
> The features:
> (1) Full RGB888 output to TFT LCD panel.
> (2) For the current LCD panel, WQVGA "480x272" is supported.
> (3) Blending of each pixel using up to 4 source layers
> dependent on size of panel.
> (4) Each graphic layer can be placed with one pixel resolution
> in either axis.
> (5) Each graphic layer support RGB565 and RGB888 direct colors
> without alpha
> channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an
> alpha channel and
> YUV422 format.
> (6) Each graphic layer support alpha blending with 8-bit
> resolution.
> 
> This is a simplified version, only one primary plane, one
> framebuffer created for
> fbdev, one crtc, one connector for TFT LCD panel, an encoder.
> 
> Signed-off-by: Alison Wang <b18965@xxxxxxxxxxxxx>
> Signed-off-by: Xiubo Li <lixiubo@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Jianwei Wang <jianwei.wang@xxxxxxxxxxxxx>

A few small things to polish that I spotted.
-Daniel

> ---
> 
> 
> Changed in V6
> 
> - Add NEC nl4827hc19_05b panel to panel-simple.c
> Adviced by Mark Yao
> - Add DRIVER_ATOMIC for driver_features
> Adviced by Mark Yao
> - check fsl_dev if it's NULL at PM suspend/resume
> Adviced by Mark Yao
> 
> Changed in V5
> 
> - Update commit message
> - Add layer registers initialization
> - Remove unused functions
> - Rename driver folder
> Adviced by Stefan Agner
> - Move pixel clock control functions to fsl_dcu_drm_drv.c
> - remove redundant enable the clock implicitly using regmap
> - Add maintainer message
> 
> Changed in V4:
> 
> -This version doesn't have functionality changed
> Just a minor adjustment.
> 
> Changed in V3:
> 
> - Test driver on Vybrid board and add compatible string
> - Remove unused functions
> - set default crtc for encoder
> - replace legacy functions with atomic help functions
> Adviced by Daniel Vetter
> - Set the unique name of the DRM device
> - Implement irq handle function for vblank interrupt
> 
> Changed in v2: 
> - Add atomic support
> Adviced by Daniel Vetter
> - Modify bindings file
> - Rename node for compatibility
> - Move platform related code out for compatibility
> Adviced by Stefan Agner
> 
> 
>  MAINTAINERS                                     |   7 +
>  drivers/gpu/drm/Kconfig                         |   2 +
>  drivers/gpu/drm/Makefile                        |   1 +
>  drivers/gpu/drm/fsl-dcu/Kconfig                 |  18 ++
>  drivers/gpu/drm/fsl-dcu/Makefile                |   7 +
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c | 200 +++++++++++++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h |  31 ++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c      | 172 +++++++++++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h      |  22 ++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c       | 379 ++++++++++++++++++++++++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h       | 223 ++++++++++++++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c     |  26 ++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c       |  42 +++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h       |  17 ++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c     | 195 ++++++++++++
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h     |  23 ++
>  16 files changed, 1365 insertions(+)
>  create mode 100644 drivers/gpu/drm/fsl-dcu/Kconfig
>  create mode 100644 drivers/gpu/drm/fsl-dcu/Makefile
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
>  create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6761318..b25b948 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3404,6 +3404,13 @@ S:	Maintained
>  F:	drivers/gpu/drm/imx/
>  F:	Documentation/devicetree/bindings/drm/imx/
>  
> +DRM DRIVERS FOR FREESCALE DCU
> +M:	Jianwei Wang <jianwei.wang@xxxxxxxxxxxxx>
> +M:	Alison Wang <alison.wang@xxxxxxxxxxxxx>
> +L:	dri-devel@xxxxxxxxxxxxxxxxxxxxx
> +S:	Supported
> +F:	drivers/gpu/drm/fsl-dcu/
> +
>  DRM DRIVERS FOR NVIDIA TEGRA
>  M:	Thierry Reding <thierry.reding@xxxxxxxxx>
>  M:	Terje Bergström <tbergstrom@xxxxxxxxxx>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index c46ca31..9cfd14e 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -231,6 +231,8 @@ source "drivers/gpu/drm/virtio/Kconfig"
>  
>  source "drivers/gpu/drm/msm/Kconfig"
>  
> +source "drivers/gpu/drm/fsl-dcu/Kconfig"
> +
>  source "drivers/gpu/drm/tegra/Kconfig"
>  
>  source "drivers/gpu/drm/panel/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 5713d05..11cb81e 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -70,3 +70,4 @@ obj-$(CONFIG_DRM_IMX) += imx/
>  obj-y			+= i2c/
>  obj-y			+= panel/
>  obj-y			+= bridge/
> +obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
> diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
> new file mode 100644
> index 0000000..bfd484b
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> @@ -0,0 +1,18 @@
> +config DRM_FSL_DCU
> +	tristate "DRM Support for Freescale DCU"
> +	depends on DRM && OF && ARM
> +	select DRM_KMS_HELPER
> +	select DRM_KMS_CMA_HELPER
> +	select VIDEOMODE_HELPERS
> +	select BACKLIGHT_CLASS_DEVICE
> +	select BACKLIGHT_LCD_SUPPORT
> +	select REGMAP_MMIO
> +	select DRM_KMS_FB_HELPER
> +	select FB_SYS_FILLRECT
> +	select FB_SYS_COPYAREA
> +	select FB_SYS_IMAGEBLIT
> +	select FB_SYS_FOPS
> +	select DRM_PANEL
> +	help
> +	  Choose this option if you have an Freescale DCU chipset.
> +	  If M is selected the module will be called fsl-dcu-drm.
> diff --git a/drivers/gpu/drm/fsl-dcu/Makefile b/drivers/gpu/drm/fsl-dcu/Makefile
> new file mode 100644
> index 0000000..336b4a6
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/Makefile
> @@ -0,0 +1,7 @@
> +fsl-dcu-drm-y := fsl_dcu_drm_drv.o \
> +	       fsl_dcu_drm_kms.o \
> +	       fsl_dcu_drm_connector.o \
> +	       fsl_dcu_drm_plane.o \
> +	       fsl_dcu_drm_crtc.o \
> +	       fsl_dcu_drm_fbdev.o
> +obj-$(CONFIG_DRM_FSL_DCU)	+= fsl-dcu-drm.o
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c
> new file mode 100644
> index 0000000..9cfe0e0
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c
> @@ -0,0 +1,200 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/backlight.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_panel.h>
> +
> +#include "fsl_dcu_drm_drv.h"
> +#include "fsl_dcu_drm_connector.h"
> +
> +static void fsl_dcu_drm_encoder_dpms(struct drm_encoder *encoder, int mode)
> +{
> +}
> +
> +static void fsl_dcu_drm_encoder_mode_prepare(struct drm_encoder *encoder)
> +{
> +}
> +
> +static void fsl_dcu_drm_encoder_mode_set(struct drm_encoder *encoder,
> +					 struct drm_display_mode *mode,
> +					 struct drm_display_mode *adjusted_mode)
> +{
> +}
> +
> +static void fsl_dcu_drm_encoder_mode_commit(struct drm_encoder *encoder)
> +{
> +}
> +
> +static void fsl_dcu_drm_encoder_disable(struct drm_encoder *encoder)
> +{
> +}
> +
> +static int
> +fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder,
> +				 struct drm_crtc_state *crtc_state,
> +				 struct drm_connector_state *conn_state)
> +{
> +	return 0;
> +}
> +
> +static void fsl_dcu_drm_encoder_destroy(struct drm_encoder *encoder)
> +{
> +	drm_encoder_cleanup(encoder);
> +}
> +
> +static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
> +	.dpms = fsl_dcu_drm_encoder_dpms,

With atomic this isn't needed any more.

> +	.prepare = fsl_dcu_drm_encoder_mode_prepare,
> +	.commit = fsl_dcu_drm_encoder_mode_commit,

These names are deprecated, new suggested names are enable and disable.
Since you have a disable hook .commit is unused.

> +	.mode_set = fsl_dcu_drm_encoder_mode_set,

.mode_set is optional

> +	.disable = fsl_dcu_drm_encoder_disable,
> +	.atomic_check = fsl_dcu_drm_encoder_atomic_check,

.atomic_check is optional

> +};
> +
> +static const struct drm_encoder_funcs encoder_funcs = {
> +	.destroy = fsl_dcu_drm_encoder_destroy,
> +};
> +
> +int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
> +			       struct drm_crtc *crtc)
> +{
> +	struct drm_encoder *encoder = &fsl_dev->encoder;
> +	int ret;
> +
> +	encoder->possible_crtcs = 1;
> +	ret = drm_encoder_init(fsl_dev->ddev, encoder, &encoder_funcs,
> +			       DRM_MODE_ENCODER_LVDS);
> +	if (ret < 0)
> +		return ret;
> +
> +	drm_encoder_helper_add(encoder, &encoder_helper_funcs);
> +	encoder->crtc = crtc;
> +
> +	return 0;
> +}
> +
> +#define to_fsl_dcu_connector(connector) \
> +	container_of(connector, struct fsl_dcu_drm_connector, connector)
> +
> +static int fsl_dcu_drm_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct fsl_dcu_drm_connector *fsl_connector;
> +	int num_modes = 0;
> +
> +	fsl_connector = to_fsl_dcu_connector(connector);
> +	if (fsl_connector->panel && fsl_connector->panel->funcs &&
> +	    fsl_connector->panel->funcs->get_modes)
> +		num_modes = fsl_connector->panel->funcs->get_modes
> +				(fsl_connector->panel);
> +
> +	return num_modes;
> +}
> +
> +static int fsl_dcu_drm_connector_mode_valid(struct drm_connector *connector,
> +					    struct drm_display_mode *mode)
> +{
> +	return MODE_OK;
> +}
> +
> +static struct drm_encoder *
> +fsl_dcu_drm_connector_best_encoder(struct drm_connector *connector)
> +{
> +	struct fsl_dcu_drm_connector *fsl_con = to_fsl_dcu_connector(connector);
> +
> +	return fsl_con->encoder;
> +}
> +
> +static void fsl_dcu_drm_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);
> +	drm_connector_cleanup(connector);
> +}
> +
> +static enum drm_connector_status
> +fsl_dcu_drm_connector_detect(struct drm_connector *connector, bool force)
> +{
> +	return connector_status_connected;
> +}
> +
> +static const struct drm_connector_funcs fsl_dcu_drm_connector_funcs = {
> +	.dpms = drm_atomic_helper_connector_dpms,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.detect = fsl_dcu_drm_connector_detect,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = fsl_dcu_drm_connector_destroy,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static const struct drm_connector_helper_funcs connector_helper_funcs = {
> +	.get_modes = fsl_dcu_drm_connector_get_modes,
> +	.mode_valid = fsl_dcu_drm_connector_mode_valid,
> +	.best_encoder = fsl_dcu_drm_connector_best_encoder,
> +};
> +
> +int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev,
> +				 struct drm_encoder *encoder)
> +{
> +	struct drm_connector *connector = &fsl_dev->connector.connector;
> +	struct device_node *panel_node;
> +	int ret;
> +
> +	fsl_dev->connector.encoder = encoder;
> +
> +	connector->display_info.width_mm = 0;
> +	connector->display_info.height_mm = 0;
> +
> +	ret = drm_connector_init(fsl_dev->ddev, connector,
> +				 &fsl_dcu_drm_connector_funcs,
> +				 DRM_MODE_CONNECTOR_LVDS);
> +	if (ret < 0)
> +		return ret;
> +
> +	connector->dpms = DRM_MODE_DPMS_OFF;
> +	drm_connector_helper_add(connector, &connector_helper_funcs);
> +	ret = drm_connector_register(connector);
> +	if (ret < 0)
> +		goto err_cleanup;
> +
> +	ret = drm_mode_connector_attach_encoder(connector, encoder);
> +	if (ret < 0)
> +		goto err_sysfs;
> +
> +	connector->encoder = encoder;
> +
> +	drm_object_property_set_value
> +		(&connector->base, fsl_dev->ddev->mode_config.dpms_property,
> +		DRM_MODE_DPMS_OFF);
> +
> +	panel_node = of_parse_phandle(fsl_dev->np, "panel", 0);
> +	if (panel_node) {
> +		fsl_dev->connector.panel = of_drm_find_panel(panel_node);
> +		if (!fsl_dev->connector.panel)
> +			return -EPROBE_DEFER;
> +	}
> +
> +	ret = drm_panel_attach(fsl_dev->connector.panel, connector);
> +	if (ret) {
> +		dev_err(fsl_dev->dev, "failed to attach panel\n");
> +		goto err_sysfs;
> +	}
> +
> +	return 0;
> +
> +err_sysfs:
> +	drm_connector_unregister(connector);
> +err_cleanup:
> +	drm_connector_cleanup(connector);
> +	return ret;
> +}
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h
> new file mode 100644
> index 0000000..1c3dbb2
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h
> @@ -0,0 +1,31 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __FSL_DCU_DRM_CONNECTOR_H__
> +#define __FSL_DCU_DRM_CONNECTOR_H__
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +#include "fsl_dcu_drm_crtc.h"
> +
> +struct fsl_dcu_drm_device;
> +struct fsl_dcu_drm_connector {
> +	struct drm_connector connector;
> +	struct drm_encoder *encoder;
> +	struct drm_panel *panel;
> +};
> +
> +int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
> +			       struct drm_crtc *crtc);
> +int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev,
> +				 struct drm_encoder *encoder);
> +
> +#endif /* __FSL_DCU_DRM_CONNECTOR_H__ */
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
> new file mode 100644
> index 0000000..4065a7c
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
> @@ -0,0 +1,172 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/regmap.h>
> +#include <linux/clk.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +
> +#include "fsl_dcu_drm_crtc.h"
> +#include "fsl_dcu_drm_drv.h"
> +#include "fsl_dcu_drm_plane.h"
> +
> +#define to_fsl_dcu_crtc(c)	container_of(c, struct fsl_dcu_drm_crtc, crtc)
> +
> +static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> +	struct drm_display_mode *mode = &crtc->state->mode;
> +	uint32_t hbp, hfp, hsw, vbp, vfp, vsw, div, index;
> +
> +	DBG(": set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
> +	    mode->base.id, mode->name,
> +	    mode->vrefresh, mode->clock,
> +	    mode->hdisplay, mode->hsync_start,
> +	    mode->hsync_end, mode->htotal,
> +	    mode->vdisplay, mode->vsync_start,
> +	    mode->vsync_end, mode->vtotal,
> +	    mode->type, mode->flags);
> +
> +	index = drm_crtc_index(crtc);
> +	div = (uint32_t)clk_get_rate(fsl_dev->clk) / mode->clock / 1000;
> +
> +	/* Configure timings: */
> +	hbp = mode->htotal - mode->hsync_end;
> +	hfp = mode->hsync_start - mode->hdisplay;
> +	hsw = mode->hsync_end - mode->hsync_start;
> +	vbp = mode->vtotal - mode->vsync_end;
> +	vfp = mode->vsync_start - mode->vdisplay;
> +	vsw = mode->vsync_end - mode->vsync_start;
> +
> +	regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
> +		     DCU_HSYN_PARA_BP(hbp) |
> +		     DCU_HSYN_PARA_PW(hsw) |
> +		     DCU_HSYN_PARA_FP(hfp));
> +	regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
> +		     DCU_VSYN_PARA_BP(vbp) |
> +		     DCU_VSYN_PARA_PW(vsw) |
> +		     DCU_VSYN_PARA_FP(vfp));
> +	regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
> +		     DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
> +		     DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
> +	regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div);
> +	regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG);
> +}
> +
> +static bool fsl_dcu_drm_crtc_mode_fixup(struct drm_crtc *crtc,
> +					const struct drm_display_mode *mode,
> +					struct drm_display_mode *adjusted_mode)
> +{
> +	return true;
> +}
> +
> +static void fsl_dcu_drm_crtc_prepare(struct drm_crtc *crtc)
> +{
> +}
> +
> +/* Now enable the clocks, plane, pipe, and connectors that we set up. */
> +static void fsl_dcu_drm_crtc_mode_commit(struct drm_crtc *crtc)
> +{
> +}
> +
> +static int fsl_dcu_drm_crtc_atomic_check(struct drm_crtc *crtc,
> +					 struct drm_crtc_state *state)
> +{
> +	return 0;
> +}
> +
> +static void fsl_dcu_drm_crtc_atomic_begin(struct drm_crtc *crtc)
> +{
> +}
> +
> +static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc)
> +{
> +}
> +
> +static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc)
> +{
> +}
> +
> +static void fsl_dcu_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
> +{
> +}
> +
> +static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = {
> +	.page_flip = drm_atomic_helper_page_flip,
> +	.set_config = drm_atomic_helper_set_config,
> +	.destroy = drm_crtc_cleanup,
> +	.reset = drm_atomic_helper_crtc_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> +};
> +
> +static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs = {
> +	.disable = fsl_dcu_drm_disable_crtc,
> +	.mode_fixup = fsl_dcu_drm_crtc_mode_fixup,
> +	.mode_set = drm_helper_crtc_mode_set,

Not needed with atomic.

> +	.mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb,
> +	.mode_set_base = drm_helper_crtc_mode_set_base,

Same, not needed.

> +	.prepare = fsl_dcu_drm_crtc_prepare,

New suggested name is ->enable

> +	.commit = fsl_dcu_drm_crtc_mode_commit,

Not needed when you have disable hook.

> +	.atomic_check = fsl_dcu_drm_crtc_atomic_check,
> +	.atomic_begin = fsl_dcu_drm_crtc_atomic_begin,
> +	.atomic_flush = fsl_dcu_drm_crtc_atomic_flush,
> +	.dpms = fsl_dcu_drm_crtc_dpms,

Again not needed.

> +};
> +
> +int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
> +{
> +	struct drm_plane *primary;
> +	struct drm_crtc *crtc = &fsl_dev->crtc;
> +	int i, ret;
> +
> +	primary = fsl_dcu_drm_primary_create_plane(fsl_dev->ddev);
> +	ret = drm_crtc_init_with_planes(fsl_dev->ddev, crtc, primary, NULL,
> +					&fsl_dcu_drm_crtc_funcs);
> +	if (ret < 0)
> +		return ret;
> +
> +	drm_crtc_helper_add(crtc, &fsl_dcu_drm_crtc_helper_funcs);
> +
> +	for (i = 0; i < DCU_TOTAL_LAYER_NUM; i++) {
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_1(i), 0);
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_2(i), 0);
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_3(i), 0);
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_4(i), 0);
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_5(i), 0);
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_6(i), 0);
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_7(i), 0);
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_8(i), 0);
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_9(i), 0);
> +		if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu"))
> +			regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_10(i), 0);
> +	}
> +	regmap_write(fsl_dev->regmap, DCU_SYN_POL,
> +		     DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW);
> +	regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
> +		     DCU_BGND_G(0) | DCU_BGND_B(0));
> +	regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
> +		     DCU_MODE_BLEND_ITER(1) | DCU_MODE_RASTER_EN);
> +	regmap_write(fsl_dev->regmap, DCU_THRESHOLD,
> +		     DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) |
> +		     DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) |
> +		     DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL));
> +	regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> +			   DCU_MODE_DCU_MODE_MASK,
> +			   DCU_MODE_DCU_MODE(DCU_MODE_OFF));
> +	regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG);
> +
> +	return 0;
> +}
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h
> new file mode 100644
> index 0000000..193785f
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __FSL_DCU_DRM_CRTC_H__
> +#define __FSL_DCU_DRM_CRTC_H__
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +
> +struct fsl_dcu_drm_device;
> +
> +int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev);
> +
> +#endif /* __FSL_DCU_DRM_CRTC_H__ */
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> new file mode 100644
> index 0000000..a06e4ee
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> @@ -0,0 +1,379 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/mm.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +
> +#include <drm/drmP.h>
> +
> +#include "fsl_dcu_drm_drv.h"
> +#include "fsl_dcu_drm_crtc.h"
> +#include "fsl_dcu_drm_kms.h"
> +
> +static int fsl_dcu_unload(struct drm_device *dev)
> +{
> +	drm_mode_config_cleanup(dev);
> +	drm_vblank_cleanup(dev);
> +	drm_irq_uninstall(dev);
> +
> +	dev->dev_private = NULL;
> +
> +	return 0;
> +}
> +
> +static struct regmap_config fsl_dcu_regmap_config = {
> +	.reg_bits = 32,
> +	.reg_stride = 4,
> +	.val_bits = 32,
> +};
> +
> +static int fsl_dcu_bypass_tcon(struct fsl_dcu_drm_device *fsl_dev,
> +			       struct device_node *np)
> +{
> +	struct device_node *tcon_np;
> +	struct platform_device *pdev;
> +	struct clk *tcon_clk;
> +	struct resource *res;
> +	void __iomem *base;
> +
> +	tcon_np = of_parse_phandle(np, "tcon-controller", 0);
> +	if (!tcon_np)
> +		return -EINVAL;
> +
> +	pdev = of_find_device_by_node(tcon_np);
> +	if (!pdev)
> +		return -EINVAL;
> +
> +	tcon_clk = devm_clk_get(&pdev->dev, "tcon");
> +	if (IS_ERR(tcon_clk))
> +		return PTR_ERR(tcon_clk);
> +	clk_prepare_enable(tcon_clk);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return -ENODEV;
> +
> +	base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	fsl_dev->tcon_regmap = devm_regmap_init_mmio(&pdev->dev,
> +			base, &fsl_dcu_regmap_config);
> +	if (IS_ERR(fsl_dev->tcon_regmap)) {
> +		dev_err(&pdev->dev, "regmap init failed\n");
> +		return PTR_ERR(fsl_dev->tcon_regmap);
> +	}
> +
> +	regmap_write(fsl_dev->tcon_regmap, TCON_CTRL1, TCON_BYPASS_ENABLE);
> +	return 0;
> +}
> +
> +static void dcu_pixclk_enable(void)
> +{
> +	struct regmap *scfg_regmap;
> +
> +	scfg_regmap = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> +	if (IS_ERR(scfg_regmap)) {
> +		pr_err("No syscfg phandle specified\n");
> +		return;
> +	}
> +
> +	regmap_write(scfg_regmap, SCFG_PIXCLKCR, PXCK_ENABLE);
> +}
> +
> +static int fsl_dcu_drm_irq_init(struct drm_device *dev)
> +{
> +	struct platform_device *pdev = dev->platformdev;
> +	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> +	unsigned int int_mask;
> +	int ret;
> +
> +	ret = drm_irq_install(dev, platform_get_irq(dev->platformdev, 0));
> +	if (ret < 0)
> +		dev_err(&pdev->dev, "failed to install IRQ handler\n");
> +
> +	dev->irq_enabled = true;
> +	dev->vblank_disable_allowed = true;
> +
> +	regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0);
> +	regmap_read(fsl_dev->regmap, DCU_INT_MASK, &int_mask);
> +	regmap_write(fsl_dev->regmap, DCU_INT_MASK, int_mask &
> +		     ~DCU_INT_MASK_VBLANK);
> +	regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG);
> +
> +	return 0;
> +}
> +
> +static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
> +{
> +	struct platform_device *pdev = dev->platformdev;
> +	struct fsl_dcu_drm_device *fsl_dev;
> +	struct resource *res;
> +	void __iomem *base;
> +	int ret;
> +
> +	fsl_dev = devm_kzalloc(&pdev->dev, sizeof(*fsl_dev), GFP_KERNEL);
> +	if (!fsl_dev)
> +		return -ENOMEM;
> +
> +	fsl_dev->dev = &pdev->dev;
> +	fsl_dev->ddev = dev;
> +	fsl_dev->np = pdev->dev.of_node;
> +	dev->dev_private = fsl_dev;
> +	dev_set_drvdata(dev->dev, fsl_dev);
> +	drm_dev_set_unique(dev, dev_name(dev->dev));
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "could not get memory IO resource\n");
> +		return -ENODEV;
> +	}
> +
> +	base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(base)) {
> +		ret = PTR_ERR(base);
> +		return ret;
> +	}
> +
> +	fsl_dev->clk = devm_clk_get(&pdev->dev, "dcu");
> +	if (IS_ERR(fsl_dev->clk)) {
> +		ret = PTR_ERR(fsl_dev->clk);
> +		dev_err(&pdev->dev, "could not get clock\n");
> +		return ret;
> +	}
> +	clk_prepare_enable(fsl_dev->clk);
> +	fsl_dev->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> +			&fsl_dcu_regmap_config);
> +	if (IS_ERR(fsl_dev->regmap)) {
> +		dev_err(&pdev->dev, "regmap init failed\n");
> +		return PTR_ERR(fsl_dev->regmap);
> +	}
> +
> +	/* Put TCON in bypass mode, so the input signals from DCU are passed
> +	 * through TCON unchanged */
> +	fsl_dcu_bypass_tcon(fsl_dev, fsl_dev->np);
> +
> +	if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu"))
> +		dcu_pixclk_enable();
> +	ret = fsl_dcu_drm_modeset_init(fsl_dev);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "failed to initialize mode setting\n");
> +		return ret;
> +	}
> +
> +	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "failed to initialize vblank\n");
> +		goto done;
> +	}
> +
> +	ret = fsl_dcu_drm_irq_init(dev);
> +	if (ret < 0)
> +		goto done;
> +
> +	fsl_dcu_fbdev_init(dev);
> +
> +	return 0;
> +done:
> +	if (ret)
> +		fsl_dcu_unload(dev);
> +
> +	return ret;
> +}
> +
> +static void fsl_dcu_drm_preclose(struct drm_device *dev, struct drm_file *file)
> +{
> +}
> +
> +static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg)
> +{
> +	struct drm_device *dev = arg;
> +	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> +	unsigned int int_status;
> +
> +	regmap_read(fsl_dev->regmap, DCU_INT_STATUS, &int_status);
> +	if (int_status & DCU_INT_STATUS_VBLANK)
> +		drm_handle_vblank(dev, 0);
> +
> +	regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0xffffffff);
> +	regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int fsl_dcu_drm_enable_vblank(struct drm_device *dev, int crtc)
> +{
> +	return 0;
> +}
> +
> +static void fsl_dcu_drm_disable_vblank(struct drm_device *dev, int crtc)
> +{
> +}
> +
> +static const struct file_operations fsl_dcu_drm_fops = {
> +	.owner		= THIS_MODULE,
> +	.open		= drm_open,
> +	.release	= drm_release,
> +	.unlocked_ioctl	= drm_ioctl,
> +#ifdef CONFIG_COMPAT
> +	.compat_ioctl	= drm_compat_ioctl,
> +#endif
> +	.poll		= drm_poll,
> +	.read		= drm_read,
> +	.llseek		= no_llseek,
> +	.mmap		= drm_gem_cma_mmap,
> +};
> +
> +static struct drm_driver fsl_dcu_drm_driver = {
> +	.driver_features	= DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET
> +				| DRIVER_PRIME | DRIVER_ATOMIC,
> +	.load			= fsl_dcu_load,
> +	.unload			= fsl_dcu_unload,
> +	.preclose		= fsl_dcu_drm_preclose,
> +	.irq_handler		= fsl_dcu_drm_irq,
> +	.get_vblank_counter	= drm_vblank_count,
> +	.enable_vblank		= fsl_dcu_drm_enable_vblank,
> +	.disable_vblank		= fsl_dcu_drm_disable_vblank,
> +	.gem_free_object	= drm_gem_cma_free_object,
> +	.gem_vm_ops		= &drm_gem_cma_vm_ops,
> +	.prime_handle_to_fd	= drm_gem_prime_handle_to_fd,
> +	.prime_fd_to_handle	= drm_gem_prime_fd_to_handle,
> +	.gem_prime_import	= drm_gem_prime_import,
> +	.gem_prime_export	= drm_gem_prime_export,
> +	.gem_prime_get_sg_table	= drm_gem_cma_prime_get_sg_table,
> +	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> +	.gem_prime_vmap		= drm_gem_cma_prime_vmap,
> +	.gem_prime_vunmap	= drm_gem_cma_prime_vunmap,
> +	.gem_prime_mmap		= drm_gem_cma_prime_mmap,
> +	.dumb_create		= drm_gem_cma_dumb_create,
> +	.dumb_map_offset	= drm_gem_cma_dumb_map_offset,
> +	.dumb_destroy		= drm_gem_dumb_destroy,
> +	.fops			= &fsl_dcu_drm_fops,
> +	.name			= "fsl-dcu-drm",
> +	.desc			= "Freescale DCU DRM",
> +	.date			= "20150213",
> +	.major			= 1,
> +	.minor			= 0,
> +};
> +
> +#ifdef CONFIG_PM_SLEEP
> +static void dcu_pixclk_disable(void)
> +{
> +	struct regmap *scfg_regmap;
> +
> +	scfg_regmap = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> +	if (IS_ERR(scfg_regmap)) {
> +		pr_err("No syscfg phandle specified\n");
> +		return;
> +	}
> +
> +	regmap_write(scfg_regmap, SCFG_PIXCLKCR, PXCK_DISABLE);
> +}
> +
> +static int fsl_dcu_drm_pm_suspend(struct device *dev)
> +{
> +	struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
> +
> +	if (!fsl_dev)
> +		return 0;
> +
> +	if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu"))
> +		dcu_pixclk_disable();
> +
> +	drm_kms_helper_poll_disable(fsl_dev->ddev);
> +	regcache_cache_only(fsl_dev->regmap, true);
> +	regcache_mark_dirty(fsl_dev->regmap);
> +	clk_disable_unprepare(fsl_dev->clk);
> +
> +	if (fsl_dev->tcon_regmap) {
> +		regcache_cache_only(fsl_dev->tcon_regmap, true);
> +		regcache_mark_dirty(fsl_dev->tcon_regmap);
> +		clk_disable_unprepare(fsl_dev->tcon_clk);
> +	}
> +
> +	return 0;
> +}
> +
> +static int fsl_dcu_drm_pm_resume(struct device *dev)
> +{
> +	struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
> +
> +	if (!fsl_dev)
> +		return 0;
> +
> +	/* Enable clocks and restore all registers */
> +	if (fsl_dev->tcon_regmap) {
> +		clk_prepare_enable(fsl_dev->tcon_clk);
> +		regcache_cache_only(fsl_dev->tcon_regmap, false);
> +		regcache_sync(fsl_dev->tcon_regmap);
> +	}
> +
> +	clk_prepare_enable(fsl_dev->clk);
> +	drm_kms_helper_poll_enable(fsl_dev->ddev);
> +	regcache_cache_only(fsl_dev->regmap, false);
> +	regcache_sync(fsl_dev->regmap);
> +
> +	if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu"))
> +		dcu_pixclk_enable();
> +
> +	return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops fsl_dcu_drm_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(fsl_dcu_drm_pm_suspend, fsl_dcu_drm_pm_resume)
> +};
> +
> +static int fsl_dcu_drm_probe(struct platform_device *pdev)
> +{
> +	return drm_platform_init(&fsl_dcu_drm_driver, pdev);

Please use drm_dev_alloc/register directly and remove the ->load callback.
Using the drm_platform.c code is deprecated. There's a pile of devices to
use as examples.
-Daniel

> +}
> +
> +static int fsl_dcu_drm_remove(struct platform_device *pdev)
> +{
> +	struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev);
> +
> +	drm_put_dev(fsl_dev->ddev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id fsl_dcu_of_match[] = {
> +		{ .compatible = "fsl,ls1021a-dcu", },
> +		{ .compatible = "fsl,vf610-dcu", },
> +		{ },
> +};
> +MODULE_DEVICE_TABLE(of, fsl_dcu_of_match);
> +
> +static struct platform_driver fsl_dcu_drm_platform_driver = {
> +	.probe		= fsl_dcu_drm_probe,
> +	.remove		= fsl_dcu_drm_remove,
> +	.driver		= {
> +		.owner	= THIS_MODULE,
> +		.name	= "fsl,dcu",
> +		.pm	= &fsl_dcu_drm_pm_ops,
> +		.of_match_table = fsl_dcu_of_match,
> +	},
> +};
> +
> +module_platform_driver(fsl_dcu_drm_platform_driver);
> +
> +MODULE_ALIAS("platform:fsl-dcu-drm");
> +MODULE_DESCRIPTION("Freescale DCU DRM Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> new file mode 100644
> index 0000000..40df1c5
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> @@ -0,0 +1,223 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __FSL_DCU_DRM_DRV_H__
> +#define __FSL_DCU_DRM_DRV_H__
> +
> +#include <linux/kernel.h>
> +#include <linux/spinlock.h>
> +#include <stddef.h>
> +#include <drm/drm.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +
> +#include "fsl_dcu_drm_crtc.h"
> +#include "fsl_dcu_drm_plane.h"
> +#include "fsl_dcu_drm_connector.h"
> +#define DRIVER_NAME			"fsl-dcu-drm"
> +
> +#define DCU_DCU_MODE			0x0010
> +#define DCU_MODE_BLEND_ITER(x)		((x) << 20)
> +#define DCU_MODE_RASTER_EN		BIT(14)
> +#define DCU_MODE_DCU_MODE(x)		(x)
> +#define DCU_MODE_DCU_MODE_MASK		0x03
> +#define DCU_MODE_OFF			0
> +#define DCU_MODE_NORMAL			1
> +#define DCU_MODE_TEST			2
> +#define DCU_MODE_COLORBAR		3
> +
> +#define DCU_BGND			0x0014
> +#define DCU_BGND_R(x)			((x) << 16)
> +#define DCU_BGND_G(x)			((x) << 8)
> +#define DCU_BGND_B(x)			(x)
> +
> +#define DCU_DISP_SIZE			0x0018
> +#define DCU_DISP_SIZE_DELTA_Y(x)	((x) << 16)
> +/*Regisiter value 1/16 of horizontal resolution*/
> +#define DCU_DISP_SIZE_DELTA_X(x)	((x) >> 4)
> +
> +#define DCU_HSYN_PARA			0x001c
> +#define DCU_HSYN_PARA_BP(x)		((x) << 22)
> +#define DCU_HSYN_PARA_PW(x)		((x) << 11)
> +#define DCU_HSYN_PARA_FP(x)		(x)
> +
> +#define DCU_VSYN_PARA			0x0020
> +#define DCU_VSYN_PARA_BP(x)		((x) << 22)
> +#define DCU_VSYN_PARA_PW(x)		((x) << 11)
> +#define DCU_VSYN_PARA_FP(x)		(x)
> +
> +#define DCU_SYN_POL			0x0024
> +#define DCU_SYN_POL_INV_PXCK_FALL	(0 << 6)
> +#define DCU_SYN_POL_NEG_REMAIN		(0 << 5)
> +#define DCU_SYN_POL_INV_VS_LOW		BIT(1)
> +#define DCU_SYN_POL_INV_HS_LOW		BIT(0)
> +
> +#define DCU_THRESHOLD			0x0028
> +#define DCU_THRESHOLD_LS_BF_VS(x)	((x) << 16)
> +#define DCU_THRESHOLD_OUT_BUF_HIGH(x)	((x) << 8)
> +#define DCU_THRESHOLD_OUT_BUF_LOW(x)	(x)
> +#define BF_VS_VAL			0x03
> +#define BUF_MAX_VAL			0x78
> +#define BUF_MIN_VAL			0x0a
> +
> +#define DCU_INT_STATUS			0x002C
> +#define DCU_INT_STATUS_VSYNC		BIT(0)
> +#define DCU_INT_STATUS_UNDRUN		BIT(1)
> +#define DCU_INT_STATUS_LSBFVS		BIT(2)
> +#define DCU_INT_STATUS_VBLANK		BIT(3)
> +#define DCU_INT_STATUS_CRCREADY		BIT(4)
> +#define DCU_INT_STATUS_CRCOVERFLOW	BIT(5)
> +#define DCU_INT_STATUS_P1FIFOLO		BIT(6)
> +#define DCU_INT_STATUS_P1FIFOHI		BIT(7)
> +#define DCU_INT_STATUS_P2FIFOLO		BIT(8)
> +#define DCU_INT_STATUS_P2FIFOHI		BIT(9)
> +#define DCU_INT_STATUS_PROGEND		BIT(10)
> +#define DCU_INT_STATUS_IPMERROR		BIT(11)
> +#define DCU_INT_STATUS_LYRTRANS		BIT(12)
> +#define DCU_INT_STATUS_DMATRANS		BIT(14)
> +#define DCU_INT_STATUS_P3FIFOLO		BIT(16)
> +#define DCU_INT_STATUS_P3FIFOHI		BIT(17)
> +#define DCU_INT_STATUS_P4FIFOLO		BIT(18)
> +#define DCU_INT_STATUS_P4FIFOHI		BIT(19)
> +#define DCU_INT_STATUS_P1EMPTY		BIT(26)
> +#define DCU_INT_STATUS_P2EMPTY		BIT(27)
> +#define DCU_INT_STATUS_P3EMPTY		BIT(28)
> +#define DCU_INT_STATUS_P4EMPTY		BIT(29)
> +
> +#define DCU_INT_MASK			0x0030
> +#define DCU_INT_MASK_VSYNC		BIT(0)
> +#define DCU_INT_MASK_UNDRUN		BIT(1)
> +#define DCU_INT_MASK_LSBFVS		BIT(2)
> +#define DCU_INT_MASK_VBLANK		BIT(3)
> +#define DCU_INT_MASK_CRCREADY		BIT(4)
> +#define DCU_INT_MASK_CRCOVERFLOW	BIT(5)
> +#define DCU_INT_MASK_P1FIFOLO		BIT(6)
> +#define DCU_INT_MASK_P1FIFOHI		BIT(7)
> +#define DCU_INT_MASK_P2FIFOLO		BIT(8)
> +#define DCU_INT_MASK_P2FIFOHI		BIT(9)
> +#define DCU_INT_MASK_PROGEND		BIT(10)
> +#define DCU_INT_MASK_IPMERROR		BIT(11)
> +#define DCU_INT_MASK_LYRTRANS		BIT(12)
> +#define DCU_INT_MASK_DMATRANS		BIT(14)
> +#define DCU_INT_MASK_P3FIFOLO		BIT(16)
> +#define DCU_INT_MASK_P3FIFOHI		BIT(17)
> +#define DCU_INT_MASK_P4FIFOLO		BIT(18)
> +#define DCU_INT_MASK_P4FIFOHI		BIT(19)
> +#define DCU_INT_MASK_P1EMPTY		BIT(26)
> +#define DCU_INT_MASK_P2EMPTY		BIT(27)
> +#define DCU_INT_MASK_P3EMPTY		BIT(28)
> +#define DCU_INT_MASK_P4EMPTY		BIT(29)
> +
> +#define DCU_DIV_RATIO			0x0054
> +
> +#define DCU_UPDATE_MODE			0x00cc
> +#define DCU_UPDATE_MODE_MODE		BIT(31)
> +#define DCU_UPDATE_MODE_READREG		BIT(30)
> +
> +#define DCU_DCFB_MAX			0x300
> +
> +#define DCU_CTRLDESCLN_1(x)		(0x200 + (x) * 0x40)
> +#define DCU_CTRLDESCLN_1_HEIGHT(x)	((x) << 16)
> +#define DCU_CTRLDESCLN_1_WIDTH(x)	(x)
> +
> +#define DCU_CTRLDESCLN_2(x)		(0x204 + (x) * 0x40)
> +#define DCU_CTRLDESCLN_2_POSY(x)	((x) << 16)
> +#define DCU_CTRLDESCLN_2_POSX(x)	(x)
> +
> +#define DCU_CTRLDESCLN_3(x)		(0x208 + (x) * 0x40)
> +
> +#define DCU_CTRLDESCLN_4(x)		(0x20c + (x) * 0x40)
> +#define DCU_CTRLDESCLN_4_EN		BIT(31)
> +#define DCU_CTRLDESCLN_4_TILE_EN	BIT(30)
> +#define DCU_CTRLDESCLN_4_DATA_SEL_CLUT	BIT(29)
> +#define DCU_CTRLDESCLN_4_SAFETY_EN	BIT(28)
> +#define DCU_CTRLDESCLN_4_TRANS(x)	((x) << 20)
> +#define DCU_CTRLDESCLN_4_BPP(x)		((x) << 16)
> +#define DCU_CTRLDESCLN_4_RLE_EN		BIT(15)
> +#define DCU_CTRLDESCLN_4_LUOFFS(x)	((x) << 4)
> +#define DCU_CTRLDESCLN_4_BB_ON		BIT(2)
> +#define DCU_CTRLDESCLN_4_AB(x)		(x)
> +
> +#define DCU_CTRLDESCLN_5(x)		(0x210 + (x) * 0x40)
> +#define DCU_CTRLDESCLN_5_CKMAX_R(x)	((x) << 16)
> +#define DCU_CTRLDESCLN_5_CKMAX_G(x)	((x) << 8)
> +#define DCU_CTRLDESCLN_5_CKMAX_B(x)	(x)
> +
> +#define DCU_CTRLDESCLN_6(x)		(0x214 + (x) * 0x40)
> +#define DCU_CTRLDESCLN_6_CKMIN_R(x)	((x) << 16)
> +#define DCU_CTRLDESCLN_6_CKMIN_G(x)	((x) << 8)
> +#define DCU_CTRLDESCLN_6_CKMIN_B(x)	(x)
> +
> +#define DCU_CTRLDESCLN_7(x)		(0x218 + (x) * 0x40)
> +#define DCU_CTRLDESCLN_7_TILE_VER(x)	((x) << 16)
> +#define DCU_CTRLDESCLN_7_TILE_HOR(x)	(x)
> +
> +#define DCU_CTRLDESCLN_8(x)		(0x21c + (x) * 0x40)
> +#define DCU_CTRLDESCLN_8_FG_FCOLOR(x)	(x)
> +
> +#define DCU_CTRLDESCLN_9(x)		(0x220 + (x) * 0x40)
> +#define DCU_CTRLDESCLN_9_BG_BCOLOR(x)	(x)
> +
> +#define DCU_CTRLDESCLN_10(x)		(0x224 + (x) * 0x40)
> +#define DCU_CTRLDESCLN_10_POST_SKIP(x)	((x) << 16)
> +#define DCU_CTRLDESCLN_10_PRE_SKIP(x)	(x)
> +
> +#ifdef CONFIG_SOC_VF610
> +#define DCU_TOTAL_LAYER_NUM             64
> +#define DCU_LAYER_NUM_MAX               6
> +#else
> +#define DCU_TOTAL_LAYER_NUM             16
> +#define DCU_LAYER_NUM_MAX               4
> +#endif
> +
> +#define FSL_DCU_RGB565			4
> +#define FSL_DCU_RGB888			5
> +#define FSL_DCU_ARGB8888		6
> +#define FSL_DCU_ARGB1555		11
> +#define FSL_DCU_ARGB4444		12
> +#define FSL_DCU_YUV422			14
> +
> +#define TCON_CTRL1			0x0000
> +#define TCON_BYPASS_ENABLE		BIT(29)
> +
> +#define SCFG_PIXCLKCR			0x28
> +#define PXCK_ENABLE			BIT(31)
> +#define PXCK_DISABLE			0
> +
> +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
> +
> +struct clk;
> +struct device;
> +struct drm_device;
> +
> +struct fsl_dcu_drm_device {
> +	struct device *dev;
> +	struct device_node *np;
> +	struct regmap *regmap;
> +	struct regmap *tcon_regmap;
> +	unsigned int irq;
> +	struct clk *clk;
> +	struct clk *tcon_clk;
> +	/*protects hardware register*/
> +	spinlock_t irq_lock;
> +	struct drm_device *ddev;
> +	struct drm_fbdev_cma *fbdev;
> +	struct drm_crtc crtc;
> +	struct drm_encoder encoder;
> +	struct fsl_dcu_drm_connector connector;
> +};
> +
> +void fsl_dcu_fbdev_init(struct drm_device *dev);
> +
> +#endif /* __FSL_DCU_DRM_DRV_H__ */
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c
> new file mode 100644
> index 0000000..f8ef0e1
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c
> @@ -0,0 +1,26 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_fb_cma_helper.h>
> +
> +#include "fsl_dcu_drm_drv.h"
> +
> +/* initialize fbdev helper */
> +void fsl_dcu_fbdev_init(struct drm_device *dev)
> +{
> +	struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev->dev);
> +
> +	fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1);
> +}
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
> new file mode 100644
> index 0000000..0de21c6
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c
> @@ -0,0 +1,42 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +
> +#include "fsl_dcu_drm_crtc.h"
> +#include "fsl_dcu_drm_connector.h"
> +#include "fsl_dcu_drm_drv.h"
> +
> +static const struct drm_mode_config_funcs fsl_dcu_drm_mode_config_funcs = {
> +	.fb_create = drm_fb_cma_create,
> +	.atomic_check = drm_atomic_helper_check,
> +	.atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev)
> +{
> +	drm_mode_config_init(fsl_dev->ddev);
> +
> +	fsl_dev->ddev->mode_config.min_width = 0;
> +	fsl_dev->ddev->mode_config.min_height = 0;
> +	fsl_dev->ddev->mode_config.max_width = 2031;
> +	fsl_dev->ddev->mode_config.max_height = 2047;
> +	fsl_dev->ddev->mode_config.funcs = &fsl_dcu_drm_mode_config_funcs;
> +
> +	drm_kms_helper_poll_init(fsl_dev->ddev);
> +	fsl_dcu_drm_crtc_create(fsl_dev);
> +	fsl_dcu_drm_encoder_create(fsl_dev, &fsl_dev->crtc);
> +	fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder);
> +	drm_mode_config_reset(fsl_dev->ddev);
> +
> +	return 0;
> +}
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h
> new file mode 100644
> index 0000000..b9bd299
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h
> @@ -0,0 +1,17 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __FSL_DCU_DRM_KMS_H__
> +#define __FSL_DCU_DRM_KMS_H__
> +
> +int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);
> +
> +#endif /* __FSL_DCU_DRM_KMS_H__ */
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
> new file mode 100644
> index 0000000..e7f879c
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
> @@ -0,0 +1,195 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <linux/regmap.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drm_atomic_helper.h>
> +
> +#include "fsl_dcu_drm_drv.h"
> +#include "fsl_dcu_drm_kms.h"
> +#include "fsl_dcu_drm_plane.h"
> +
> +#define to_fsl_dcu_plane(plane) \
> +	container_of(plane, struct fsl_dcu_drm_plane, plane)
> +
> +static int
> +fsl_dcu_drm_plane_prepare_fb(struct drm_plane *plane,
> +			     struct drm_framebuffer *fb,
> +			     const struct drm_plane_state *new_state)
> +{
> +	return 0;
> +}
> +
> +static void
> +fsl_dcu_drm_plane_cleanup_fb(struct drm_plane *plane,
> +			     struct drm_framebuffer *fb,
> +			     const struct drm_plane_state *new_state)
> +{
> +}
> +
> +static int fsl_dcu_drm_plane_atomic_check(struct drm_plane *plane,
> +					  struct drm_plane_state *state)
> +{
> +	return 0;
> +}
> +
> +static void fsl_dcu_drm_plane_atomic_disable(struct drm_plane *plane,
> +					     struct drm_plane_state *old_state)
> +{
> +}
> +
> +void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane,
> +				     struct drm_plane_state *old_state)
> +{
> +	struct fsl_dcu_drm_device *fsl_dev = plane->dev->dev_private;
> +	struct drm_plane_state *state = plane->state;
> +	struct drm_framebuffer *fb = plane->state->fb;
> +	struct drm_gem_cma_object *gem;
> +	struct fsl_dcu_drm_plane *fsl_plane = to_fsl_dcu_plane(plane);
> +	u32 index, alpha, bpp;
> +
> +	if (!fb)
> +		return;
> +
> +	index = fsl_plane->index;
> +	gem = drm_fb_cma_get_gem_obj(fb, 0);
> +
> +	switch (fb->pixel_format) {
> +	case DRM_FORMAT_RGB565:
> +		bpp = FSL_DCU_RGB565;
> +		alpha = 0xff;
> +		break;
> +	case DRM_FORMAT_RGB888:
> +		bpp = FSL_DCU_RGB888;
> +		alpha = 0xff;
> +		break;
> +	case DRM_FORMAT_ARGB8888:
> +		bpp = FSL_DCU_ARGB8888;
> +		alpha = 0xff;
> +		break;
> +	case DRM_FORMAT_BGRA4444:
> +		bpp = FSL_DCU_ARGB4444;
> +		alpha = 0xff;
> +		break;
> +	case DRM_FORMAT_ARGB1555:
> +		bpp = FSL_DCU_ARGB1555;
> +		alpha = 0xff;
> +		break;
> +	case DRM_FORMAT_YUV422:
> +		bpp = FSL_DCU_YUV422;
> +		alpha = 0xff;
> +		break;
> +	default:
> +		return;
> +	}
> +
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_1(index),
> +		     DCU_CTRLDESCLN_1_HEIGHT(state->crtc_h) |
> +		     DCU_CTRLDESCLN_1_WIDTH(state->crtc_w));
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_2(index),
> +		     DCU_CTRLDESCLN_2_POSY(state->crtc_y) |
> +		     DCU_CTRLDESCLN_2_POSX(state->crtc_x));
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_3(index), gem->paddr);
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_4(index),
> +		     DCU_CTRLDESCLN_4_EN |
> +		     DCU_CTRLDESCLN_4_TRANS(alpha) |
> +		     DCU_CTRLDESCLN_4_BPP(bpp) |
> +		     DCU_CTRLDESCLN_4_AB(0));
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_5(index),
> +		     DCU_CTRLDESCLN_5_CKMAX_R(0xFF) |
> +		     DCU_CTRLDESCLN_5_CKMAX_G(0xFF) |
> +		     DCU_CTRLDESCLN_5_CKMAX_B(0xFF));
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_6(index),
> +		     DCU_CTRLDESCLN_6_CKMIN_R(0) |
> +		     DCU_CTRLDESCLN_6_CKMIN_G(0) |
> +		     DCU_CTRLDESCLN_6_CKMIN_B(0));
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_7(index), 0);
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_8(index),
> +		     DCU_CTRLDESCLN_8_FG_FCOLOR(0));
> +	regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_9(index),
> +		     DCU_CTRLDESCLN_9_BG_BCOLOR(0));
> +	if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu"))
> +		regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_10(index),
> +			     DCU_CTRLDESCLN_10_POST_SKIP(0) |
> +			     DCU_CTRLDESCLN_10_PRE_SKIP(0));
> +	regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> +			   DCU_MODE_DCU_MODE_MASK,
> +			   DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
> +	regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG);
> +}
> +
> +int fsl_dcu_drm_plane_disable(struct drm_plane *plane)
> +{
> +	return 0;
> +}
> +
> +void fsl_dcu_drm_plane_destroy(struct drm_plane *plane)
> +{
> +	fsl_dcu_drm_plane_disable(plane);
> +	drm_plane_cleanup(plane);
> +}
> +
> +static const uint32_t fsl_dcu_drm_plane_formats[] = {
> +	DRM_FORMAT_RGB565,
> +	DRM_FORMAT_RGB888,
> +	DRM_FORMAT_ARGB8888,
> +	DRM_FORMAT_ARGB4444,
> +	DRM_FORMAT_ARGB1555,
> +	DRM_FORMAT_YUV422,
> +};
> +
> +static const struct drm_plane_funcs fsl_dcu_drm_plane_funcs = {
> +	.update_plane = drm_atomic_helper_update_plane,
> +	.disable_plane = drm_atomic_helper_disable_plane,
> +	.destroy = fsl_dcu_drm_plane_destroy,
> +	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> +	.reset = drm_atomic_helper_plane_reset,
> +};
> +
> +static const struct drm_plane_helper_funcs fsl_dcu_drm_plane_helper_funcs = {
> +	.prepare_fb = fsl_dcu_drm_plane_prepare_fb,
> +	.cleanup_fb = fsl_dcu_drm_plane_cleanup_fb,
> +	.atomic_check = fsl_dcu_drm_plane_atomic_check,
> +	.atomic_update = fsl_dcu_drm_plane_atomic_update,
> +	.atomic_disable = fsl_dcu_drm_plane_atomic_disable,
> +};
> +
> +struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev)
> +{
> +	struct drm_plane *primary;
> +	int ret;
> +
> +	primary = kzalloc(sizeof(*primary), GFP_KERNEL);
> +	if (!primary) {
> +		DRM_DEBUG_KMS("Failed to allocate primary plane\n");
> +		return NULL;
> +	}
> +
> +	/* possible_crtc's will be filled in later by crtc_init */
> +	ret = drm_universal_plane_init(dev, primary, 0,
> +				       &fsl_dcu_drm_plane_funcs,
> +				       fsl_dcu_drm_plane_formats,
> +				       ARRAY_SIZE(fsl_dcu_drm_plane_formats),
> +				       DRM_PLANE_TYPE_PRIMARY);
> +	if (ret) {
> +		kfree(primary);
> +		primary = NULL;
> +	}
> +	drm_plane_helper_add(primary, &fsl_dcu_drm_plane_helper_funcs);
> +
> +	return primary;
> +}
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
> new file mode 100644
> index 0000000..ccbfa61
> --- /dev/null
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
> @@ -0,0 +1,23 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * Freescale DCU drm device driver
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __FSL_DCU_DRM_PLANE_H__
> +#define __FSL_DCU_DRM_PLANE_H__
> +
> +struct fsl_dcu_drm_device;
> +struct fsl_dcu_drm_plane {
> +	struct drm_plane plane;
> +	unsigned int index;
> +};
> +
> +struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev);
> +
> +#endif /* __FSL_DCU_DRM_PLANE_H__ */
> -- 
> 2.1.0.27.g96db324
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux