This patch set adds support for the internal USB OTG PHY found on NXP LPC18xx and LPC43xx devices. Driver takes care of enabling the PHY and setting the clock rate which is need for USB0 support on this platform. This version address moves the dt node under the creg syscon and rebases the patch set on 4.2-rc1. Changes in v4: - rebase on 4.2-rc1 - move dt node under creg where the control reg is Changes in v3: - depend on MFD_SYSCON Changes in v2: - use PTR_ERR_OR_ZERO in phy driver - rename binding doc - update doc commit message Joachim Eastwood (2): phy: add lpc18xx usb otg phy driver phy: dt bindings: add NXP LPC18xx/43xx USB OTG PHY bindings .../bindings/phy/phy-lpc18xx-usb-otg.txt | 26 ++++ drivers/phy/Kconfig | 11 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-lpc18xx-usb-otg.c | 143 +++++++++++++++++++++ 4 files changed, 181 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt create mode 100644 drivers/phy/phy-lpc18xx-usb-otg.c -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
