Add device tree binding documentation for the SPI Flash Interface
(SPIFI) found on NXP LPC18xx and LPC43xx devies.
Signed-off-by: Joachim Eastwood <manabian@xxxxxxxxx>
---
.../devicetree/bindings/mtd/nxp-spifi.txt | 58 ++++++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/nxp-spifi.txt
diff --git a/Documentation/devicetree/bindings/mtd/nxp-spifi.txt b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
new file mode 100644
index 000000000000..f8b6b250654e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
@@ -0,0 +1,58 @@
+* NXP SPI Flash Interface (SPIFI)
+
+NXP SPIFI is a specialized SPI interface for serial Flash devices.
+It supports one Flash device with 1-, 2- and 4-bits width in SPI
+mode 0 or 3. The controller operates in either command or memory
+mode. In memory mode the Flash is accessible from the CPU as
+normal memory.
+
+Required properties:
+ - compatible : Should be "nxp,lpc1773-spifi"
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - reg-names: Should contain the reg names "spifi" and "flash"
+ - interrupts : Should contain the interrupt for the device
+ - clocks : The clocks needed by the SPIFI controller
+ - clock-names : Should contain the clock names "spifi" and "reg"
+
+Optional properties:
+ - resets : phandle + reset specifier
+
+The SPI Flash must be a child of the SPIFI node and must have a
+compatible property as specified in bindings/mtd/jedec,spi-nor.txt
+
+Optionally it can also contain the following properties.
+ - spi-cpol : Controller only supports mode 0 and 3 so either
+ both spi-cpol and spi-cpha should be present or
+ none of them
+ - spi-cpha : See above
+ - spi-rx-bus-width : Used to select how many pins that are used
+ for input on the controller
+
+See bindings/spi/spi-bus.txt for more information.
+
+Example:
+spifi: spifi@40003000 {
+ compatible = "nxp,lpc1773-spifi";
+ reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+ reg-names = "spifi", "flash";
+ interrupts = <30>;
+ clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+ clock-names = "spifi", "reg";
+ resets = <&rgu 53>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "data";
+ reg = <0 0x200000>;
+ };
+ };
+};
+
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
