On Wed, Jul 08, 2015 at 11:14:40AM +0100, Mars Cheng wrote:
> This adds basic chip support for MT6795 SoC
>
> Signed-off-by: Mars Cheng <mars.cheng@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt6795-evb.dts | 34 ++++++
> arch/arm64/boot/dts/mediatek/mt6795.dtsi | 164 ++++++++++++++++++++++++++++
> 3 files changed, 199 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6795-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6795.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 3ce2462..e0a4bff 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,3 +1,4 @@
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
>
> always := $(dtb-y)
> diff --git a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
> new file mode 100644
> index 0000000..3a43c860
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "mt6795.dtsi"
> +
> +/ {
> + model = "MediaTek MT6795 Evaluation Board";
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x1e800000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,921600n8 earlyprintk";
PLease get rid of bootargs here; earlyprintk doesn't do anything on
arm64 (it's earlycon these days), and you can specify the serial
configuration in stdout-path, so please use that instead.
> + stdout-path = &uart0;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
> new file mode 100644
> index 0000000..832be20
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
> @@ -0,0 +1,164 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "mediatek,mt6795";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x000>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x001>;
> + };
No enable-method? Does your FW patch that in?
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x002>;
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x003>;
> + };
> +
> + cpu4: cpu@4 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x100>;
> + };
The unit-address should match the reg (e.g. this should be cpu@100).
> +
> + cpu5: cpu@5 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x101>;
> + };
> +
> + cpu6: cpu@6 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x102>;
> + };
> +
> + cpu7: cpu@7 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x103>;
> + };
> + };
> +
> + clocks {
> + system_clk: dummy13m {
> + compatible = "fixed-clock";
> + clock-frequency = <13000000>;
> + #clock-cells = <0>;
> + };
> +
> + rtc_clk: dummy32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> + };
Get rid of the clocks node and place these directly under the root node.
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
The mask is wrong.
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
