On 2015-07-01 22:20, Cory Tusar wrote: > This commit extends the existing Vybrid QSPI devicetree implementation > to also describe the qspi1 functional block. > > Signed-off-by: Cory Tusar <cory.tusar@xxxxxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/vfxxx.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi > index 089a263..a7c370e 100644 > --- a/arch/arm/boot/dts/vfxxx.dtsi > +++ b/arch/arm/boot/dts/vfxxx.dtsi > @@ -251,6 +251,19 @@ > status = "disabled"; > }; > > + qspi1: quadspi@400c4000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,vf610-qspi"; > + reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>; > + reg-names = "QuadSPI", "QuadSPI-memory"; > + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks VF610_CLK_QSPI1_EN>, > + <&clks VF610_CLK_QSPI1>; > + clock-names = "qspi_en", "qspi"; > + status = "disabled"; > + }; > + > iomuxc: iomuxc@40048000 { > compatible = "fsl,vf610-iomuxc"; > reg = <0x40048000 0x1000>; This seem to be at the wrong place under aips0. qspi1 should be under aips1. just before fec0. But other than that, I checked the addresses looks good to me. Hence with that change applied you can include: Reviewed-by: Stefan Agner <stefan@xxxxxxxx> -- Stefan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html