Currently the CPG/MSTP Clock Domain code looks for MSTP clocks to power manage a device. Unfortunately, on R-Mobile APE6 (r8a73a4) and SH-Mobile AG5 (sh73a0), the Bus State Controller (BSC) is not power-managed by an MSTP clock, but by a plain CPG clock (zb_clk). Add a special case to handle this, so the clock is properly managed, and devices connected to the BSC work as expected. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- v3: - Use "CPG/MSTP Clock Domain" instead of "CPG Clock Domain", v2: - New. --- drivers/clk/shmobile/clk-mstp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c index 9b4451304f5732d4..9975695ca814614f 100644 --- a/drivers/clk/shmobile/clk-mstp.c +++ b/drivers/clk/shmobile/clk-mstp.c @@ -258,6 +258,10 @@ int cpg_mstp_attach_dev(struct generic_pm_domain *domain, struct device *dev) "renesas,cpg-mstp-clocks")) goto found; + /* BSC on r8a73a4/sh73a0 uses zb_clk instead of an mstp clock*/ + if (!strcmp(clkspec.np->name, "zb_clk")) + goto found; + of_node_put(clkspec.np); i++; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
