This patch adds a new DT property, "atmel,fifo-size", to enable and set the maximum number of data the RX and TX FIFOs can store on FIFO capable USARTs. Please be aware that the VERSION register can not be used to guess the size of FIFOs. Indeed, for a given hardware version, the USARTs can be integrated on Atmel SoCs with different FIFO sizes. Also the "atmel,fifo-size" property is optional as older USARTs don't embed FIFO at all. Besides, the FIFO size can not be read or guessed from other registers: When designing the FIFO feature, no dedicated registers were added to store this size. Unsed spaces in the I/O register range are limited and better reserved for future usages. Instead, the FIFO size of each peripheral is documented in the programmer datasheet. Finally, on a given SoC, there can be several instances of USART with different FIFO sizes. This explain why we'd rather use a dedicated DT property than use the "compatible" property. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx> Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> --- Documentation/devicetree/bindings/serial/atmel-usart.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 90787aa2e648..e6e6142e33ac 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -22,6 +22,8 @@ Optional properties: memory peripheral interface and USART DMA channel ID, FIFO configuration. Refer to dma.txt and atmel-dma.txt for details. - dma-names: "rx" for RX channel, "tx" for TX channel. +- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO + capable USARTs. <chip> compatible description: - at91rm9200: legacy USART support @@ -57,4 +59,5 @@ Example: dmas = <&dma0 2 0x3>, <&dma0 2 0x204>; dma-names = "tx", "rx"; + atmel,fifo-size = <32>; }; -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html