Signed-off-by: Kimmo Saarela <kimmo.saarela@xxxxxxxxx> --- .../devicetree/bindings/sound/tlv320aic32x4.txt | 25 +++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt index 143a192..0141aab 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt @@ -13,12 +13,33 @@ Required properties: If you supply ldoin, dv and av are optional. Otherwise they are required See regulator/regulator.txt for more information about the detailed binding format. + - input-use: Array of input pins used by the driver, shall contain 6 values. + Pin input order is lin1, rin1, lin2, rin2, lin3, rin3. + Each value can hold value for primary function in low nybble (x & 0xf) or + value for secondary function in high nybble (x & 0xf0). + Possible values are: + 0 = input not in use + 1 = input connected with 10k Ohm (0dB) + 2 = input connected with 20k Ohm (-6dB) + 3 = input connected with 40k Ohm (-12dB) + If value for pin is 0, driver connects the pin weakly to common mode Optional properties: - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt - clocks/clock-names: Clock named 'mclk' for the master clock of the codec. See clock/clock-bindings.txt for information about the detailed format. - + - swapdacs: Swap dac channel + - powercfg: Power configuration mask for codec + - cmode: Array of common mode setup data when channels are used in single + ended mode. + Parameter order is cmode1, cmode2. + Low nybble holds config for left channel and high nybble holds config for + right channel. + Possible values are: + 0 = cmode not in use + 1 = cmode connected with 10k Ohm (0dB) + 2 = cmode connected with 20k Ohm (-6dB) + 3 = cmode connected with 40k Ohm (-12dB) Example: @@ -27,4 +48,6 @@ codec: tlv320aic32x4@18 { reg = <0x18>; clocks = <&clks 201>; clock-names = "mclk"; + input-use = <1 1 0 0 0 0>; + cmode = <0x11 0>; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html