From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
Add binding documentation for the Qualcomm Resource Power Manager (RPM)
using shared memory (Qualcomm SMD) as transport mechanism. This is found
in 8974 and newer based devices.
The binding currently describes the rpm itself and the regulator
subnodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/mfd/qcom-rpm-smd.txt | 117 +++++++++++++++++++++
include/dt-bindings/mfd/qcom-smd-rpm.h | 28 +++++
2 files changed, 145 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm-smd.txt
create mode 100644 include/dt-bindings/mfd/qcom-smd-rpm.h
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm-smd.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm-smd.txt
new file mode 100644
index 0000000..e27f5c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm-smd.txt
@@ -0,0 +1,117 @@
+Qualcomm Resource Power Manager (RPM) over SMD
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-msm8974"
+
+- qcom,smd-channels:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Shared Memory channel used for communication with the RPM
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Regulators
+
+Regulator nodes are identified by their compatible:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8841-regulators"
+ "qcom,rpm-pm8941-regulators"
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+ Usage: optional (pm8841 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_l1_l3-supply:
+- vdd_l2_lvs1_2_3-supply:
+- vdd_l4_l11-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l14_l15-supply:
+- vdd_l8_l16_l18_l19-supply:
+- vdd_l9_l10_l17_l22-supply:
+- vdd_l13_l20_l23_l24-supply:
+- vdd_l21-supply:
+- vin_5vs-supply:
+ Usage: optional (pm8941 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+The regulator node houses sub-nodes for each regulator within the device. Each
+sub-node is identified using the node's name, with valid values listed for each
+of the pmics below.
+
+pm8841:
+ s1, s2, s3, s4, s5, s6, s7, s8
+
+pm8941:
+ s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+ l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
+ lvs3, 5vs1, 5vs2
+
+The content of each sub-node is defined by the standard binding for regulators -
+see regulator.txt.
+
+= EXAMPLE
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+ vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_boost: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ };
+ };
+ };
+ };
+
diff --git a/include/dt-bindings/mfd/qcom-smd-rpm.h b/include/dt-bindings/mfd/qcom-smd-rpm.h
new file mode 100644
index 0000000..890ca52
--- /dev/null
+++ b/include/dt-bindings/mfd/qcom-smd-rpm.h
@@ -0,0 +1,28 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_MFD_QCOM_SMD_RPM_H
+#define _DT_BINDINGS_MFD_QCOM_SMD_RPM_H
+
+/*
+ * Constants used for addressing resources in the RPM.
+ */
+#define QCOM_SMD_RPM_BUS_CLK 0x316b6c63
+#define QCOM_SMD_RPM_BUS_MASTER 0x73616d62
+#define QCOM_SMD_RPM_BUS_SLAVE 0x766c7362
+#define QCOM_SMD_RPM_CLK_BUF_A 0x616B6C63
+#define QCOM_SMD_RPM_LDOA 0x616f646c
+#define QCOM_SMD_RPM_LDOB 0x626F646C
+#define QCOM_SMD_RPM_MEM_CLK 0x326b6c63
+#define QCOM_SMD_RPM_MISC_CLK 0x306b6c63
+#define QCOM_SMD_RPM_NCPA 0x6170636E
+#define QCOM_SMD_RPM_NCPB 0x6270636E
+#define QCOM_SMD_RPM_OCMEM_PWR 0x706d636f
+#define QCOM_SMD_RPM_QPIC_CLK 0x63697071
+#define QCOM_SMD_RPM_SMPA 0x61706d73
+#define QCOM_SMD_RPM_SMPB 0x62706d73
+#define QCOM_SMD_RPM_SPDM 0x63707362
+#define QCOM_SMD_RPM_VSA 0x00617376
+
+#endif
--
1.9.3 (Apple Git-50)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
