[PATCH] dts: ls1021a: Add dts nodes for eTSEC0, eTSEC1 and eTSEC2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch adds generic dts nodes for eTSEC0, eTSEC1 and eTSEC2.

Signed-off-by: Claudiu Manoil <claudiu.manoil@xxxxxxxxxxxxx>
Signed-off-by: Alison Wang <alison.wang@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 20 ++++++++++
 arch/arm/boot/dts/ls1021a-twr.dts | 20 ++++++++++
 arch/arm/boot/dts/ls1021a.dtsi    | 82 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 122 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 9c5e16b..f16a061 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -75,6 +75,26 @@
 	};
 };
 
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a2c591e..4b61766 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -73,6 +73,26 @@
 	};
 };
 
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..6c41b10 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -59,6 +59,9 @@
 		serial3 = &lpuart3;
 		serial4 = &lpuart4;
 		serial5 = &lpuart5;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
 		sysclk = &sysclk;
 	};
 
@@ -391,6 +394,85 @@
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		enet0: ethernet@2d10000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			fsl,dma-endian-le;
+			fsl,magic-packet;
+			fsl,wake-on-filer;
+			fsl,num_rx_queues = <0x1>;
+			fsl,num_tx_queues = <0x1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			ranges;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x0 0x2d10000 0x0 0x8000>;
+				fsl,rx-bit-map = <0xff>;
+				fsl,tx-bit-map = <0xff>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+		};
+
+		enet1: ethernet@2d50000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			fsl,dma-endian-le;
+			fsl,num_rx_queues = <0x1>;
+			fsl,num_tx_queues = <0x1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			ranges;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x0 0x2d50000 0x0 0x8000>;
+				fsl,rx-bit-map = <0xff>;
+				fsl,tx-bit-map = <0xff>;
+				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+		};
+
+		enet2: ethernet@2d90000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			fsl,dma-endian-le;
+			fsl,num_rx_queues = <0x1>;
+			fsl,num_tx_queues = <0x1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			ranges;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x0 0x2d90000 0x0 0x8000>;
+				fsl,rx-bit-map = <0xff>;
+				fsl,tx-bit-map = <0xff>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		usb@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux