Hi,
On 24-06-15 13:23, Lee Jones wrote:
Add a cell for the usb power_supply part of the axp20x PMICs.
Why are you duplicating the subject line?
Heh, because some maintainers insist that the main-body part of the
commit message must stand by itself, without needing the subject to be
understandable...
Note that this cell is only for the usb power_supply part and not the
ac-power / battery-charger / rtc-backup-bat-charger bits.
Depending on the board each of those must be enabled / disabled separately
in devicetree as most boards do not use all 4. So in dt each one needs its
own child-node of the axp20x node. Another reason for using separate child
nodes for each is so that other devicetree nodes can have a power-supply
property with a phandle referencing a node representing a single
power-supply.
The decision to use a separate devicetree node for each is reflected on
the kernel side by each getting its own mfd-cell / platform_device and
platform-driver.
You don't really need to say any of this, as this is the 'norm'.
I agree it should be the norm, but I'm not sure if it actually is, while
working on this I've seen several drivers which instantiate multiple
power-supply class devices from a single mfd-cell. And this is what
Bruno's original patches did, so I would prefer to keep this
What you didn't mention however, is that you're taking the opportunity
to fix some formatting issues and that there are no functional changes
in these lines.
That is the end result of your request to change the indentation to
avoid line-wrapping :)
Cc: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
-Use DEFINE_RES_IRQ_NAMED
-Change indentation of axp20x_cells initializers to avoid line wrapping
---
drivers/mfd/axp20x.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
Patch looks okay however:
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
Thanks.
Regards,
Hans
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index f9a3c2d..ca4a604 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -113,6 +113,13 @@ static struct resource axp20x_pek_resources[] = {
},
};
+static struct resource axp20x_usb_power_supply_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+ DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+ DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"),
+ DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
+};
+
static struct resource axp22x_pek_resources[] = {
{
.name = "PEK_DBR",
@@ -363,11 +370,16 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
static struct mfd_cell axp20x_cells[] = {
{
- .name = "axp20x-pek",
- .num_resources = ARRAY_SIZE(axp20x_pek_resources),
- .resources = axp20x_pek_resources,
+ .name = "axp20x-pek",
+ .num_resources = ARRAY_SIZE(axp20x_pek_resources),
+ .resources = axp20x_pek_resources,
}, {
- .name = "axp20x-regulator",
+ .name = "axp20x-regulator",
+ }, {
+ .name = "axp20x-usb-power-supply",
+ .of_compatible = "x-powers,axp202-usb-power-supply",
+ .num_resources = ARRAY_SIZE(axp20x_usb_power_supply_resources),
+ .resources = axp20x_usb_power_supply_resources,
},
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
