On Wed, 24 Jun 2015 15:06:02 +0300
Roger Quadros <rogerq@xxxxxx> wrote:
> On Tue, 23 Jun 2015 17:28:54 +0530
> Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
>
> > Add "syscon-phy-power" property and remove the deprecated "ctrl-module"
> > property from SATA PHY node. Since "omap_control_sata" note is no longer
> > used, remove it.
> >
> > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>
> Acked-by: Roger Quadros <rogerq@xxxxxx>
One comment though.
>
> > ---
> > arch/arm/boot/dts/dra7.dtsi | 10 +---------
> > 1 file changed, 1 insertion(+), 9 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> > index 3f434f7..92e0741 100644
> > --- a/arch/arm/boot/dts/dra7.dtsi
> > +++ b/arch/arm/boot/dts/dra7.dtsi
> > @@ -1115,14 +1115,6 @@
> > status = "disabled";
> > };
> >
> > - omap_control_sata: control-phy@4a002374 {
> > - compatible = "ti,control-phy-pipe3";
> > - reg = <0x4a002374 0x4>;
> > - reg-names = "power";
> > - clocks = <&sys_clkin1>;
> > - clock-names = "sysclk";
> > - };
> > -
> > /* OCP2SCP3 */
> > ocp2scp@4a090000 {
> > compatible = "ti,omap-ocp2scp";
> > @@ -1137,7 +1129,7 @@
> > <0x4A096400 0x64>, /* phy_tx */
> > <0x4A096800 0x40>; /* pll_ctrl */
> > reg-names = "phy_rx", "phy_tx", "pll_ctrl";
> > - ctrl-module = <&omap_control_sata>;
> > + syscon-phy-power = <&dra7_ctrl_core 0x374>;
why can't we use scm_conf instead of dra7_ctrl_core?
dra7_ctrl_core seems to be redundant and wrongly placed.
> > clocks = <&sys_clkin1>, <&sata_ref_clk>;
> > clock-names = "sysclk", "refclk";
> > syscon-pllreset = <&dra7_ctrl_core 0x3fc>;
> > --
> > 1.7.9.5
> >
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
