* Roger Quadros <rogerq@xxxxxx> [150624 04:58]:
> On Wed, 24 Jun 2015 14:50:17 +0300
> Roger Quadros <rogerq@xxxxxx> wrote:
>
> > On Tue, 23 Jun 2015 17:28:53 +0530
> > Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
> >
> > > Add new device tree node for the control module register space where
> > > PCIe registers are present.
> > >
> > > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> > > ---
> > > arch/arm/boot/dts/dra7.dtsi | 5 +++++
> > > 1 file changed, 5 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> > > index 260f300..3f434f7 100644
> > > --- a/arch/arm/boot/dts/dra7.dtsi
> > > +++ b/arch/arm/boot/dts/dra7.dtsi
> > > @@ -291,6 +291,11 @@
> > > reg = <0x4a002e00 0x7c>;
> > > };
> > >
> > > + dra7_ctrl_pcie: tisyscon@4a003c00 {
> > > + compatible = "syscon";
> > > + reg = <0x4a003c00 0x48>;
> > > + };
> > > +
> >
> > Why do you need to start from 0x4a003c00?
> > CTRL_CORE_PCIESS1_PCS1 is at 0x4a003c24
>
> Also, why can't this dra7_ctrl_pcie node be where scm_conf is.
Yes all the scm children should be under scm@2000 entry in the
dra7.dtsi file.
And BTW, there's nothing stopping a driver doing of_ioremap
on a larger range and be a child under scm@2000 in the dra7.dtsi
if that range is dedicated to a single driver.
My take is we should only use regmap for the scm_conf area
in general.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
