Re: [PATCH-v2 3/3] mfd: devicetree: bindings: Add new 88pm800 mfd binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On Wednesday 24 June 2015 05:59 AM, Krzysztof Kozlowski wrote:
2015-06-18 3:58 GMT+09:00 Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>:
With addition of DT support to 88pm800 mfd driver, this patch
adds new DT binding documentation along with respective properties.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
---
  Documentation/devicetree/bindings/mfd/88pm800.txt | 60 +++++++++++++++++++++++
  1 file changed, 60 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/mfd/88pm800.txt

diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt
new file mode 100644
index 0000000..b8e72df
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/88pm800.txt
@@ -0,0 +1,60 @@
+* Marvell 88PM8xx Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm800", "marvell,88pm805", "marvell,88pm860"
+- reg : the I2C slave address for the 88pm8xx chip
+- interrupts : IRQ line for the 88pm8xx chip
+- interrupt-controller: describes the 88pm8xx as an interrupt controller
+- #interrupt-cells : should be 1.
+               - The cell is the 88pm8xx local IRQ number
+
+Optional parent device properties:
+- marvell,irq-clr-on-write: indicates whether interrupt status is cleared
+  by write or read.
+  If enabled, interrupt is cleared by write else just read would do.
+
+88pm8xx family of devices consists of varied group of sub-devices:
+
+Device                 Supply Names     Description
+------                 ------------     -----------
+88pm80x-onkey          :               : On key
+88pm80x-rtc            :               : RTC
+88pm80x-regulator      :               : Regulators
+
+Note: More device list will follow
+
+Example:
+
+       pmic: 88pm800@30 {
+               compatible = "marvell,88pm800";
+               reg = <0x30>;
+               interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-parent = <&gic>;
+               interrupt-controller;
+               #interrupt-cells = <1>;
+
+               marvell,irq-clr-on-write;
+
+               regulators {
+                       compatible = "marvell,88pm80x-regulator";
+
+                       buck1a: BUCK1A {
+                               regulator-compatible = "88PM800-BUCK1A";

That's a deprecated property.
Documentation/devicetree/bindings/regulator/regulator.txt


Yes,

Will replace with regulator-name and resubmit shortly with Rob's
Acked-by.



Thanks,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux