Adding Mike's new email address..
On 23-06-15, 23:31, Pi-Cheng Chen wrote:
> On Mon, Jun 8, 2015 at 8:29 PM, Pi-Cheng Chen <pi-cheng.chen@xxxxxxxxxx> wrote:
> > This patch adds device tree binding document for MT8173 cpufreq driver.
> >
> > Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@xxxxxxxxxx>
> > ---
> > .../devicetree/bindings/cpufreq/cpufreq-mt8173.txt | 127 +++++++++++++++++++++
> > 1 file changed, 127 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
> >
> > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
> > new file mode 100644
> > index 0000000..7708a65
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
> > @@ -0,0 +1,127 @@
> > +
> > +Mediatek MT8173 cpufreq driver
> > +-------------------
Few more ---- required.
> > +
> > +Mediatek MT8173 cpufreq driver for CPU frequency scaling.
> > +
> > +Required properties:
> > +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
> > +- clock-names: Should contain the following:
> > + "cpu" - The multiplexer for clock input of CPU cluster.
> > + "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
> > + source (usually MAINPLL) when the original CPU PLL is under
> > + transition and not stable yet.
These belong to Mike.
> > +- operating-points: Table of frequencies and voltage CPU could be transitioned into,
> > + Frequency should be in KHz units and voltage should be in microvolts.
That's not complete. You should just mention the path to opp bindings
here. And that's it.
> > +- proc-supply: Regulator for Vproc of CPU cluster.
> > +
> > +Optional properties:
> > +- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
> > + needs to do "voltage trace" to step by step scale up/down Vproc and
> > + Vsram to fit SoC specific needs. When absent, the voltage scaling
> > + flow is handled by hardware, hence no software "voltage trace" is
> > + needed.
> > +
> > +Example:
> > +--------
> > + cpu0: cpu@0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x000>;
> > + enable-method = "psci";
> > + cpu-idle-states = <&CPU_SLEEP_0>;
> > + clocks = <&infracfg CLK_INFRA_CA53SEL>,
> > + <&apmixedsys CLK_APMIXED_MAINPLL>;
> > + clock-names = "cpu", "intermediate";
> > + operating-points = <
> > + 507000 859000
> > + 702000 908000
> > + 1001000 983000
> > + 1105000 1009000
> > + 1183000 1028000
> > + 1404000 1083000
> > + 1508000 1109000
> > + 1573000 1125000
> > + >;
> > + };
> > +
> > + cpu1: cpu@1 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x001>;
> > + enable-method = "psci";
> > + cpu-idle-states = <&CPU_SLEEP_0>;
> > + clocks = <&infracfg CLK_INFRA_CA53SEL>,
> > + <&apmixedsys CLK_APMIXED_MAINPLL>;
> > + clock-names = "cpu", "intermediate";
> > + operating-points = <
> > + 507000 859000
> > + 702000 908000
> > + 1001000 983000
> > + 1105000 1009000
> > + 1183000 1028000
> > + 1404000 1083000
> > + 1508000 1109000
> > + 1573000 1125000
> > + >;
> > + };
> > +
> > + cpu2: cpu@100 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a57";
> > + reg = <0x100>;
> > + enable-method = "psci";
> > + cpu-idle-states = <&CPU_SLEEP_0>;
> > + clocks = <&infracfg CLK_INFRA_CA57SEL>,
> > + <&apmixedsys CLK_APMIXED_MAINPLL>;
> > + clock-names = "cpu", "intermediate";
> > + operating-points = <
> > + 507000 828000
> > + 702000 867000
> > + 1001000 927000
> > + 1209000 968000
> > + 1404000 1007000
> > + 1612000 1049000
> > + 1807000 1089000
> > + 1989000 1125000
> > + >;
> > + };
> > +
> > + cpu3: cpu@101 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a57";
> > + reg = <0x101>;
> > + enable-method = "psci";
> > + cpu-idle-states = <&CPU_SLEEP_0>;
> > + clocks = <&infracfg CLK_INFRA_CA57SEL>,
> > + <&apmixedsys CLK_APMIXED_MAINPLL>;
> > + clock-names = "cpu", "intermediate";
> > + operating-points = <
> > + 507000 828000
> > + 702000 867000
> > + 1001000 927000
> > + 1209000 968000
> > + 1404000 1007000
> > + 1612000 1049000
> > + 1807000 1089000
> > + 1989000 1125000
> > + >;
> > + };
I remember Mark Rutland asking you about the replicated stuff for all
CPUs, but happened to his comments later on ? Were you asked to put
these for all the CPUs ?
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
