Re: [PATCH 01/17] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, 23 Jun 2015 17:28:46 +0530
Kishon Vijay Abraham I <kishon@xxxxxx> wrote:

> No functional change. Previously omap_control_phy_power() was used to power
> off the PHY during probe. But once PIPE3 driver is adapted to use syscon,
> omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off
> to power off the PHY.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>

Acked-by: Roger Quadros <rogerq@xxxxxx>

cheers,
-roger

> ---
>  drivers/phy/phy-ti-pipe3.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
> index 08020dc..d784426 100644
> --- a/drivers/phy/phy-ti-pipe3.c
> +++ b/drivers/phy/phy-ti-pipe3.c
> @@ -431,8 +431,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
>  
>  	phy->control_dev = &control_pdev->dev;
>  
> -	omap_control_phy_power(phy->control_dev, 0);
> -
>  	platform_set_drvdata(pdev, phy);
>  	pm_runtime_enable(phy->dev);
>  
> @@ -451,6 +449,8 @@ static int ti_pipe3_probe(struct platform_device *pdev)
>  		return PTR_ERR(generic_phy);
>  
>  	phy_set_drvdata(generic_phy, phy);
> +	ti_pipe3_power_off(generic_phy);
> +
>  	phy_provider = devm_of_phy_provider_register(phy->dev,
>  			of_phy_simple_xlate);
>  	if (IS_ERR(phy_provider))
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux