Deprecate using phy-omap-control driver to set PCS value of the PHY and start using *syscon* framework to do the same. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- Documentation/devicetree/bindings/phy/ti-phy.txt | 2 ++ drivers/phy/phy-ti-pipe3.c | 32 +++++++++++++++++++++- 2 files changed, 33 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index d3ad3bf..52c7a92 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -83,6 +83,8 @@ Optional properties: - syscon-pllreset: Handle to system control region that contains the CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. + - syscon-pcs : phandle/offset pair. Phandle to the system control module and the + register offset to write the PCS delay value. Deprecated properties: - ctrl-module : phandle of the control module used by PHY driver to power on diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 78bac00..e2f9ad7 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -65,6 +65,9 @@ #define PIPE3_PHY_TX_RX_POWERON 0x3 #define PIPE3_PHY_TX_RX_POWEROFF 0x0 +#define PCIE_PCS_MASK 0xFF0000 +#define PCIE_PCS_DELAY_COUNT_SHIFT 0x10 + /* * This is an Empirical value that works, need to confirm the actual * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status @@ -96,9 +99,11 @@ struct ti_pipe3 { struct clk *div_clk; struct pipe3_dpll_map *dpll_map; struct regmap *phy_power_syscon; /* ctrl. reg. acces */ + struct regmap *pcs_syscon; /* ctrl. reg. acces */ struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */ unsigned int dpll_reset_reg; /* reg. index within syscon */ unsigned int power_reg; /* power reg. index within syscon */ + unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */ bool sata_refclk_enabled; }; @@ -271,7 +276,16 @@ static int ti_pipe3_init(struct phy *x) * 18-1804. */ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { - omap_control_pcie_pcs(phy->control_dev, 0x96); + if (phy->pcs_syscon) { + val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT; + ret = regmap_update_bits(phy->pcs_syscon, + phy->pcie_pcs_reg, + PCIE_PCS_MASK, val); + if (ret < 0) + return ret; + } else { + omap_control_pcie_pcs(phy->control_dev, 0x96); + } return 0; } @@ -455,6 +469,22 @@ static int ti_pipe3_probe(struct platform_device *pdev) dev_err(&pdev->dev, "unable to get div-clk\n"); return PTR_ERR(phy->div_clk); } + + phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node, + "syscon-pcs"); + if (IS_ERR(phy->pcs_syscon)) { + dev_dbg(&pdev->dev, + "can't get syscon-pcs, using omap control\n"); + phy->pcs_syscon = NULL; + } else { + if (of_property_read_u32_index(node, + "syscon-pcs", 1, + &phy->pcie_pcs_reg)) { + dev_err(&pdev->dev, + "couldn't get pcie pcs reg. offset\n"); + return -EINVAL; + } + } } else { phy->div_clk = ERR_PTR(-ENODEV); } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html