Hi Heiko,
Oh sure, I completly forgot this issue ^^ , no problem. If you want
some help feel free to ping on IRC.
I did not notice regressions or issues, but my system was not under
load, I will try to investigate and/or test with care.
Have a nice day,
Romain
2015-06-23 13:09 GMT+02:00 Heiko Stübner <heiko@xxxxxxxxx>:
> Hi Romain,
>
> Am Dienstag, 23. Juni 2015, 08:53:17 schrieb Romain Perier:
>> ping :)
>
> I haven't forgotten this patch :-)
>
> I just haven't fully made up my mind concerning the bug in the pl330
> implementation on Rockchip SoCs - aka if we'll make it worse by also enabling
> dma on the uarts.
>
> So far the problem reports I read only mentioned degraded functionality like
> popping sounds in audio, not full system failures or freezes. So I tend to
> include the patch and see what happens ;-)
>
>
> Heiko
>
>
>
>> 2015-06-16 19:19 GMT+02:00 Romain Perier <romain.perier@xxxxxxxxx>:
>> > This enable DMA capability for the corresponding UART interfaces, also it
>> > removes warning "ttyS%d - Failed to request dma" from kernel logs.
>> >
>> > Signed-off-by: Romain Perier <romain.perier@xxxxxxxxx>
>> > ---
>> >
>> > Changes since v1 ("[PATCH] ARM: dts: rockchip: Add dmac_bus rx and tx for
> uart2"):
>> > - Add DMA tx and rx channels for all UART interfaces
>> > - Rename commit summary
>> >
>> > arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++
>> > 1 file changed, 10 insertions(+)
>> >
>> > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> > index 22316d0..1996452 100644
>> > --- a/arch/arm/boot/dts/rk3288.dtsi
>> > +++ b/arch/arm/boot/dts/rk3288.dtsi
>> > @@ -359,6 +359,8 @@
>> >
>> > clock-names = "baudclk", "apb_pclk";
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&uart0_xfer>;
>> >
>> > + dmas = <&dmac_peri 1>, <&dmac_peri 2>;
>> > + dma-names = "tx", "rx";
>> >
>> > status = "disabled";
>> >
>> > };
>> >
>> > @@ -372,6 +374,8 @@
>> >
>> > clock-names = "baudclk", "apb_pclk";
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&uart1_xfer>;
>> >
>> > + dmas = <&dmac_peri 3>, <&dmac_peri 4>;
>> > + dma-names = "tx", "rx";
>> >
>> > status = "disabled";
>> >
>> > };
>> >
>> > @@ -385,6 +389,8 @@
>> >
>> > clock-names = "baudclk", "apb_pclk";
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&uart2_xfer>;
>> >
>> > + dmas = <&dmac_bus_s 4>, <&dmac_bus_s 5>;
>> > + dma-names = "tx", "rx";
>> >
>> > status = "disabled";
>> >
>> > };
>> >
>> > @@ -398,6 +404,8 @@
>> >
>> > clock-names = "baudclk", "apb_pclk";
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&uart3_xfer>;
>> >
>> > + dmas = <&dmac_peri 7>, <&dmac_peri 8>;
>> > + dma-names = "tx", "rx";
>> >
>> > status = "disabled";
>> >
>> > };
>> >
>> > @@ -411,6 +419,8 @@
>> >
>> > clock-names = "baudclk", "apb_pclk";
>> > pinctrl-names = "default";
>> > pinctrl-0 = <&uart4_xfer>;
>> >
>> > + dmas = <&dmac_peri 9>, <&dmac_peri 10>;
>> > + dma-names = "tx", "rx";
>> >
>> > status = "disabled";
>> >
>> > };
>> >
>> > --
>> > 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
