Re: [PATCH 7/8] cpufreq: st: Provide runtime initialised driver for ST's platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 22-06-15, 16:43, Lee Jones wrote:
> +config ARM_ST_CPUFREQ
> +	bool "ST CPUFreq support"

Isn't using ST just too generic? There are multiple SoCs ST has been
involved with, I have worked on a completely different series.
Probably a more relative string is required here, like stih407 ?

> +	depends on SOC_STIH407

> diff --git a/drivers/cpufreq/st-cpufreq.c b/drivers/cpufreq/st-cpufreq.c
> +static int st_cpufreq_cmp(const void *a, const void *b)
> +{
> +	const struct st_dvfs_tab *a_tab = a, *b_tab = b;
> +
> +	if (a_tab->freq > b_tab->freq)
> +		return -1;
> +
> +	if (a_tab->freq < b_tab->freq)
> +		return 1;
> +
> +	return 0;
> +}
> +
> +static int st_cpufreq_check_if_matches(struct device_node *child,
> +				       const char *prop,
> +				       unsigned int match)
> +{
> +	unsigned int dt_major, dt_minor;
> +	unsigned int soc_major, soc_minor;
> +	const __be32 *tmp;
> +	unsigned int val;
> +	int len = 0;
> +	int i;
> +
> +	tmp = of_get_property(child, prop , &len);
> +	if (!tmp || !len)
> +		return -EINVAL;
> +
> +	val = be32_to_cpup(tmp);
> +
> +	len /= sizeof(u32);
> +	if (len == 1 && val == 0xff)
> +		/*
> +		 * If 'cuts' or 'substrate' value is 0xff, it means that
> +		 * the entry is valid for ALL cuts and substrates
> +		 */
> +		goto matchfound;
> +
> +	/* Check if this opp node is for us */
> +	for (i = 0; i < len; i++) {
> +		if (match == val)
> +			goto matchfound;
> +
> +		if (!strcmp(prop, "st,cuts")) {
> +			dt_major  = val & 0xff;;
> +			dt_minor  = val >> 8 & 0xff;
> +			soc_major = match & 0xff;
> +			soc_minor = match >> 8 & 0xff;
> +
> +			if (dt_major == soc_major &&
> +			    (!dt_minor || (dt_minor == soc_minor)))
> +				goto matchfound;
> +		}
> +		val++;
> +	}
> +
> +	/* No match found */
> +	return -EINVAL;
> +
> +matchfound:
> +	return 0;
> +}
> +
> +static int st_cpufreq_get_version(struct platform_device *pdev,
> +				  unsigned int *minor, unsigned int *major)
> +{
> +	struct st_cpufreq_ddata *ddata = platform_get_drvdata(pdev);
> +	struct device_node *np = pdev->dev.of_node;
> +	struct regmap *syscfg_regmap;
> +	unsigned int minor_offset, major_offset;
> +	unsigned int socid, minid;
> +	int ret;
> +
> +	/* Get Major */
> +	syscfg_regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> +	if (IS_ERR(syscfg_regmap)) {
> +		dev_err(&pdev->dev,
> +			"No syscfg phandle specified in %s [%li]\n",
> +			np->full_name, PTR_ERR(syscfg_regmap));
> +		return PTR_ERR(syscfg_regmap);
> +	}
> +
> +	ret = of_property_read_u32_index(np, "st,syscfg",
> +					 MAJOR_ID_INDEX, &major_offset);
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"No minor number offset provided in %s [%d]\n",
> +			np->full_name, ret);
> +		return ret;
> +	}
> +
> +	ret = regmap_read(syscfg_regmap, major_offset, &socid);
> +	if (ret)
> +		return ret;
> +
> +	/* Get Minor */
> +	ret = of_property_read_u32_index(np, "st,syscfg-eng",
> +					 MINOR_ID_INDEX, &minor_offset);
> +	if (ret) {
> +		dev_err(&pdev->dev, "No minor number offset provided %s [%d]\n",
> +			np->full_name, ret);
> +		return ret;
> +	}
> +
> +	ret = regmap_read(ddata->regmap_eng, minor_offset, &minid);
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"Failed to read the minor number from syscon [%d]\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	*major = ((socid >> VERSION_SHIFT) & 0xf) + 1;
> +	*minor = minid & 0xf;
> +
> +	return 0;
> +}
> +
> +static int st_cpufreq_get_dvfs_info(struct platform_device *pdev)
> +{
> +	struct st_cpufreq_ddata *ddata = platform_get_drvdata(pdev);
> +	struct st_dvfs_tab *dvfs_tab = &ddata->dvfs_tab[0];
> +	struct device_node *np = pdev->dev.of_node;
> +	struct device_node *opplist, *opp;
> +	unsigned int minor = 0, major = 0;
> +	int err, ret = 0;
> +
> +	opplist = of_get_child_by_name(np, "opp-list");

st,opp-list ?

> +	if (!opplist) {
> +		dev_err(&pdev->dev, "opp-list node missing\n");
> +		return -ENODATA;
> +	}
> +
> +	ret = st_cpufreq_get_version(pdev, &minor, &major);
> +	if (ret) {
> +		dev_err(&pdev->dev, "No OPP match found for this platform\n");
> +		return ret;
> +	}
> +
> +	for_each_child_of_node(opplist, opp) {
> +		if (ddata->dvfs_tab_count == STI_DVFS_TAB_MAX) {
> +			dev_err(&pdev->dev, "Too many DVFS entries found\n");
> +			ret = -EOVERFLOW;
> +			break;
> +		}
> +
> +		/* Cut version e.g. 2.0 [major.minor] */
> +		err = st_cpufreq_check_if_matches(opp, "st,cuts",
> +						  (minor << 8) | major);
> +		if (err)
> +			continue;
> +
> +		ret = st_cpufreq_check_if_matches(opp, "st,substrate",
> +						  ddata->substrate);
> +		if (err)
> +			continue;
> +
> +		ret = of_property_read_u32(opp, "st,freq", &dvfs_tab->freq);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Can't read frequency: %d\n", ret);
> +			goto out;
> +		}
> +		dvfs_tab->freq *= 1000;
> +
> +		ret = of_property_read_u32_index(opp, "st,avs",
> +						 ddata->pcode,
> +						 &dvfs_tab->avs);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Can't read AVS: %d\n", ret);
> +			goto out;
> +		}
> +
> +		dvfs_tab++;
> +		ddata->dvfs_tab_count++;
> +	}
> +
> +	sort(&ddata->dvfs_tab[0], ddata->dvfs_tab_count,
> +	     sizeof(struct st_dvfs_tab), st_cpufreq_cmp, NULL);
> +
> +out:
> +	of_node_put(opplist);
> +
> +	if (!ddata->dvfs_tab_count) {
> +		dev_err(&pdev->dev, "No suitable AVS table found\n");

Why is this an error? I thought in this case you will go ahead with
the normal OPP-table.

> +		return -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static int sti_cpufreq_voltage_scaling_init(struct platform_device *pdev)
> +{
> +	struct st_cpufreq_ddata *ddata = platform_get_drvdata(pdev);
> +	struct st_dvfs_tab *dvfs_tab = &ddata->dvfs_tab[0];
> +	struct device *cpu_dev;
> +	struct dev_pm_opp *opp;
> +	unsigned long highest_freq = 0;
> +	int ret;
> +	int i;
> +
> +	cpu_dev = get_cpu_device(0);
> +	if (!cpu_dev) {
> +		dev_err(&pdev->dev, "Failed to get cpu0 device\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Populate OPP table with default non-AVS frequency values */
> +	of_init_opp_table(cpu_dev);
> +
> +	/*
> +	 * Disable, but keep default values -- this prevents the framework from
> +	 * erroneously re-adding and enabling entries with missing voltage rates
> +	 */
> +	while (1) {
> +		highest_freq++;
> +
> +		opp = dev_pm_opp_find_freq_ceil(cpu_dev, &highest_freq);
> +		if (IS_ERR(opp))
> +			break;
> +
> +		ret = dev_pm_opp_disable(cpu_dev, highest_freq);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to disable freq: %li\n",
> +				highest_freq);
> +			return ret;
> +		}
> +	}
> +
> +	for (i = 0; i < ddata->dvfs_tab_count; i++, dvfs_tab++) {
> +		unsigned int f = dvfs_tab->freq * 1000;
> +		unsigned int v = dvfs_tab->avs * 1000;
> +
> +		opp = dev_pm_opp_find_freq_exact(cpu_dev, f, false);
> +
> +		/* Remove existing voltage-less OPP entry */
> +		if (!IS_ERR(opp))
> +			dev_pm_opp_remove(cpu_dev, f);
> +
> +		/* Supply new fully populated OPP entry */
> +		ret = dev_pm_opp_add(cpu_dev, f, v);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to add OPP %u\n", f);
> +			return ret;
> +		}
> +	}

So you have added new OPPs here, but cpufreq-dt will try to add old
OPPs. You must be getting lots of warnings ?

> +
> +	return 0;
> +}
> +
> +static int st_cpufreq_fetch_regmap_field(struct platform_device *pdev,
> +					 const struct reg_field *reg_fields,
> +					 int pcode_offset, int field)
> +{
> +	struct st_cpufreq_ddata *ddata = platform_get_drvdata(pdev);
> +	struct regmap_field *regmap_field;
> +	struct reg_field reg_field = reg_fields[field];
> +	unsigned int value;
> +	int ret;
> +
> +	reg_field.reg = pcode_offset;
> +	regmap_field = devm_regmap_field_alloc(&pdev->dev,
> +					       ddata->regmap_eng,
> +					       reg_field);
> +	if (IS_ERR(regmap_field)) {
> +		dev_err(&pdev->dev, "Failed to allocate reg field\n");
> +		return PTR_ERR(regmap_field);
> +	}
> +
> +	ret = regmap_field_read(regmap_field, &value);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to read %s code\n",
> +			field ? "SUBSTRATE" : "PCODE");
> +		return ret;
> +	}
> +
> +	return value;
> +}
> +
> +static const struct reg_field sti_stih407_dvfs_regfields[DVFS_MAX_REGFIELDS] = {
> +	[PCODE]		= REG_FIELD(0, 16, 19),
> +	[SUBSTRATE]	= REG_FIELD(0, 0, 2),
> +};
> +
> +static struct of_device_id sti_cpufreq_of_match[] = {
> +	{
> +		.compatible = "st,stih407-cpufreq",
> +		.data = &sti_stih407_dvfs_regfields,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, sti_cpufreq_of_match);
> +
> +/* Find process code -- calibrated per-SoC */
> +static void sti_cpufreq_get_pcode(struct platform_device *pdev)
> +{
> +	struct st_cpufreq_ddata *ddata = platform_get_drvdata(pdev);
> +	struct device_node *np = pdev->dev.of_node;
> +	const struct reg_field *reg_fields;
> +	const struct of_device_id *match;
> +	int pcode_offset;
> +	int ret;
> +
> +	ddata->regmap_eng = syscon_regmap_lookup_by_phandle(np, "st,syscfg-eng");
> +	if (IS_ERR(ddata->regmap_eng)) {
> +		dev_warn(&pdev->dev, "\"st,syscfg-eng\" not supplied\n");
> +		goto set_default;
> +	}
> +
> +	ret = of_property_read_u32_index(np, "st,syscfg-eng",
> +					 PCODE_INDEX, &pcode_offset);
> +	if (ret) {
> +		dev_warn(&pdev->dev, "Process code offset is required\n");
> +		goto set_default;
> +	}
> +
> +	match = of_match_node(sti_cpufreq_of_match, np);

Are you planning to add more entries to this table? We are here as
probe() is called only after matching for this string.

> +	if (!match) {
> +		dev_warn(&pdev->dev, "Failed to match device\n");
> +		goto set_default;
> +	}
> +	reg_fields = match->data;
> +
> +	ddata->pcode = st_cpufreq_fetch_regmap_field(pdev, reg_fields,
> +						     pcode_offset,
> +						     PCODE);
> +	if (ddata->pcode < 0)
> +		goto set_default;
> +
> +	ddata->substrate = st_cpufreq_fetch_regmap_field(pdev, reg_fields,
> +							 pcode_offset,
> +							 SUBSTRATE);
> +	if (ddata->substrate < 0)
> +		goto set_default;

Maybe:

	if (ddata->substrate >= 0)
                return;

> +
> +	return;
> +
> +set_default:
> +	dev_warn(&pdev->dev,
> +		 "Setting pcode to highest tolerance/voltage for safety\n");
> +	ddata->pcode = 0;
> +	ddata->substrate = 0;
> +}
> +
> +static int sti_cpufreq_probe(struct platform_device *pdev)
> +{
> +	struct st_cpufreq_ddata *ddata;
> +	int ret;
> +
> +	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
> +	if (!ddata)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, ddata);
> +
> +	sti_cpufreq_get_pcode(pdev);
> +
> +	ret = st_cpufreq_get_dvfs_info(pdev);
> +	if (ret)
> +		dev_warn(&pdev->dev, "Not doing voltage scaling [%d]\n", ret);
> +	else
> +		sti_cpufreq_voltage_scaling_init(pdev);
> +
> +	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
> +
> +	return 0;
> +}
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux