From: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
Add support for the new R-Car Gen2 CMT0 and CMT1 bindings. Support
for the old DT binding is still kept around, however devices using
such binding will be treated as a low-feature CMT0 device. If users
want to make use of CMT1-specific features then they need to update
their DTBs. No special CMT1-specific features are however implemented
by his patch, only DT bindings are redone as groundwork for future
feature patches.
Signed-off-by: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
---
drivers/clocksource/sh_cmt.c | 40 ++++++++++++++++++++++++++++------------
1 file changed, 28 insertions(+), 12 deletions(-)
--- 0005/drivers/clocksource/sh_cmt.c
+++ work/drivers/clocksource/sh_cmt.c 2015-06-20 14:16:44.472366518 +0900
@@ -39,16 +39,16 @@ struct sh_cmt_device;
* SoC but also on the particular instance. The following table lists the main
* characteristics of those flavours.
*
- * 16B 32B 32B-F 48B 48B-2
+ * 16B 32B 32B-F 48B R-Car Gen2
* -----------------------------------------------------------------------------
* Channels 2 1/4 1 6 2/8
* Control Width 16 16 16 16 32
* Counter Width 16 32 32 32/48 32/48
* Shared Start/Stop Y Y Y Y N
*
- * The 48-bit gen2 version has a per-channel start/stop register located in the
- * channel registers block. All other versions have a shared start/stop register
- * located in the global space.
+ * The r8a73a4 / R-Car Gen2 version has a per-channel start/stop register
+ * located in the channel registers block. All other versions have a shared
+ * start/stop register located in the global space.
*
* Channels are indexed from 0 to N-1 in the documentation. The channel index
* infers the start/stop bit position in the control register and the channel
@@ -68,7 +68,8 @@ enum sh_cmt_model {
SH_CMT_32BIT,
SH_CMT_32BIT_FAST,
SH_CMT_48BIT,
- SH_CMT_48BIT_GEN2,
+ SH_CMT0_RCAR_GEN2,
+ SH_CMT1_RCAR_GEN2,
};
struct sh_cmt_info {
@@ -223,8 +224,20 @@ static const struct sh_cmt_info sh_cmt_i
.read_count = sh_cmt_read32,
.write_count = sh_cmt_write32,
},
- [SH_CMT_48BIT_GEN2] = {
- .model = SH_CMT_48BIT_GEN2,
+ [SH_CMT0_RCAR_GEN2] = {
+ .model = SH_CMT0_RCAR_GEN2,
+ .channels_mask = 0x60,
+ .width = 32,
+ .overflow_bit = SH_CMT32_CMCSR_CMF,
+ .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
+ .read_control = sh_cmt_read32,
+ .write_control = sh_cmt_write32,
+ .read_count = sh_cmt_read32,
+ .write_count = sh_cmt_write32,
+ },
+ [SH_CMT1_RCAR_GEN2] = {
+ .model = SH_CMT1_RCAR_GEN2,
+ .channels_mask = 0xff,
.width = 32,
.overflow_bit = SH_CMT32_CMCSR_CMF,
.clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
@@ -861,6 +874,7 @@ static int sh_cmt_setup_channel(struct s
ch->cmt = cmt;
ch->index = index;
ch->hwidx = hwidx;
+ ch->timer_bit = hwidx;
/*
* Compute the address of the channel control register block. For the
@@ -882,9 +896,11 @@ static int sh_cmt_setup_channel(struct s
*/
ch->ioctrl = cmt->mapbase + 0x40;
break;
- case SH_CMT_48BIT_GEN2:
+ case SH_CMT0_RCAR_GEN2:
+ case SH_CMT1_RCAR_GEN2:
ch->iostart = cmt->mapbase + ch->hwidx * 0x100;
ch->ioctrl = ch->iostart + 0x10;
+ ch->timer_bit = 0;
break;
}
@@ -896,8 +912,6 @@ static int sh_cmt_setup_channel(struct s
ch->match_value = ch->max_match_value;
raw_spin_lock_init(&ch->lock);
- ch->timer_bit = cmt->info->model == SH_CMT_48BIT_GEN2 ? 0 : ch->hwidx;
-
ret = sh_cmt_register(ch, dev_name(&cmt->pdev->dev),
clockevent, clocksource);
if (ret) {
@@ -934,7 +948,7 @@ static const struct platform_device_id s
{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
{ "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },
{ "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },
- { "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },
+ { "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT0_RCAR_GEN2] },
{ }
};
MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
@@ -943,7 +957,9 @@ static const struct of_device_id sh_cmt_
{ .compatible = "renesas,cmt-32", .data = &sh_cmt_info[SH_CMT_32BIT] },
{ .compatible = "renesas,cmt-32-fast", .data = &sh_cmt_info[SH_CMT_32BIT_FAST] },
{ .compatible = "renesas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] },
- { .compatible = "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT_48BIT_GEN2] },
+ { .compatible = "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2] },
+ { .compatible = "renesas,cmt0-rcar-gen2", .data = &sh_cmt_info[SH_CMT0_RCAR_GEN2] },
+ { .compatible = "renesas,cmt1-rcar-gen2", .data = &sh_cmt_info[SH_CMT1_RCAR_GEN2] },
{ }
};
MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
