On Fri, Jun 19, 2015 at 12:05 PM, Nicolae Rosia <nicolae.rosia@xxxxxxxxx> wrote:
> Hi,
>
> On Fri, Jun 19, 2015 at 6:32 PM, <Frank.Li@xxxxxxxxxxxxx> wrote:
>> From: Frank Li <Frank.Li@xxxxxxxxxxxxx>
> [...]
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu0: cpu@0 {
>> + compatible = "arm,cortex-a7";
>> + device_type = "cpu";
>> + reg = <0>;
>> + clock-latency = <61036>; /* two CLK32 periods */
>> + operating-points = <
>> + /* kHz uV */
>> + 528000 1250000
>> + 396000 1150000
>> + 198000 1150000
>> + >;
>> + fsl,soc-operating-points = <
>> + /* KHz uV */
>> + 528000 1250000
>> + 396000 1150000
>> + 198000 1150000
>> + >;
> Why is this necessary? Can't you adapt the driver to use operating-points?
> I have looked through other imx dts and saw that some had different
> values in these two tables.
It is used by internal busfreq driver. I will remove it at next version.
best regards
Frank Li
>
> Best regards,
> Nicolae Rosia
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
