Re: [PATCH v5 08/23] usb: chipidea: set usb gadeget's otg capabilities

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, 18 Jun 2015 16:20:30 +0800
Li Jun <b47624@xxxxxxxxxxxxx> wrote:

> On Thu, Jun 18, 2015 at 10:39:35AM +0300, Roger Quadros wrote:
> > Typo in subject
> > gadeget's -> gadget's
> > 
> > On Wed, 17 Jun 2015 19:40:15 +0800
> > Li Jun <jun.li@xxxxxxxxxxxxx> wrote:
> > 
> > > Set gadget's otg capabilities according to controller's capability and otg
> > > properties in device tree.
> > > 
> > > Signed-off-by: Li Jun <jun.li@xxxxxxxxxxxxx>
> > > ---
> > >  drivers/usb/chipidea/core.c  | 8 ++++++++
> > >  drivers/usb/chipidea/udc.c   | 7 ++++++-
> > >  include/linux/usb/chipidea.h | 1 +
> > >  3 files changed, 15 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> > > index 74fea4f..2abecbc 100644
> > > --- a/drivers/usb/chipidea/core.c
> > > +++ b/drivers/usb/chipidea/core.c
> > > @@ -588,6 +588,14 @@ static int ci_get_platdata(struct device *dev,
> > >  				of_usb_host_tpl_support(dev->of_node);
> > >  	}
> > >  
> > > +	if (platdata->dr_mode == USB_DR_MODE_OTG) {
> > > +		/* We can support HNP and SRP */
> > > +		platdata->ci_otg_caps.hnp_support = true;
> > > +		platdata->ci_otg_caps.srp_support = true;
> > > +		/* Update otg capabilities by DT properties */
> > > +		of_usb_set_otg_caps(dev->of_node, &platdata->ci_otg_caps);
> > 
> > we're not tackling the legacy platform case.
> > i.e. when otg-rev is not present in DT.
> > 
> Legacy platforms with chipidea controller can use otg HNP and SRP
> without any otg properties passed, so I keep hnp and srp to be true.

I was thinking that controller should set whatever it supports regardless of
legacy platforms.
e.g. if chipidea controller supports ADP then it should set it to true here
before calling of_usb_update_otg_caps().

And it should also set the best OTG version it supports and not leave it to 0.

of_usb_update_otg_caps() should then take the decision based on
controller otg_caps and DT otg flags as to what must be done.

> 
> > one way could be that of_usb_set_otg_caps sets otg-rev to 0 if
> > it is not present in DT.
> > 
> otg-rev should be 0 as initial value if it's not present in DT, isn't it?

That's because you didn't set the otg-rev that chipidea controller supports.

This will break for example if DT passes otg-rev 3.0 and controller supports
only otg-rev 2.0 but we didn't bother to check :)

Let's do whatever common functionality we can in of_usb_update_otg_caps()
rather than depending on controller drivers and inviting more errors.

cheers,
-roger

> 
> > > +	}
> > > +
> > >  	if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
> > >  		platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
> > >  
> > > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> > > index 764f668..858bd21 100644
> > > --- a/drivers/usb/chipidea/udc.c
> > > +++ b/drivers/usb/chipidea/udc.c
> > > @@ -1827,6 +1827,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
> > >  static int udc_start(struct ci_hdrc *ci)
> > >  {
> > >  	struct device *dev = ci->dev;
> > > +	struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
> > >  	int retval = 0;
> > >  
> > >  	spin_lock_init(&ci->lock);
> > > @@ -1834,8 +1835,12 @@ static int udc_start(struct ci_hdrc *ci)
> > >  	ci->gadget.ops          = &usb_gadget_ops;
> > >  	ci->gadget.speed        = USB_SPEED_UNKNOWN;
> > >  	ci->gadget.max_speed    = USB_SPEED_HIGH;
> > > -	ci->gadget.is_otg       = ci->is_otg ? 1 : 0;
> > >  	ci->gadget.name         = ci->platdata->name;
> > > +	ci->gadget.otg_caps	= otg_caps;
> > > +
> > > +	if (otg_caps->otg_rev && (otg_caps->hnp_support ||
> > > +		otg_caps->srp_support || otg_caps->adp_support))
> > > +		ci->gadget.is_otg = 1;
> > >  
> > >  	INIT_LIST_HEAD(&ci->gadget.ep_list);
> > >  
> > > diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> > > index ab94f78..e10cefc 100644
> > > --- a/include/linux/usb/chipidea.h
> > > +++ b/include/linux/usb/chipidea.h
> > > @@ -34,6 +34,7 @@ struct ci_hdrc_platform_data {
> > >  #define CI_HDRC_CONTROLLER_STOPPED_EVENT	1
> > >  	void	(*notify_event) (struct ci_hdrc *ci, unsigned event);
> > >  	struct regulator	*reg_vbus;
> > > +	struct usb_otg_caps	ci_otg_caps;
> > >  	bool			tpl_support;
> > >  };
> > >  
> > > -- 
> > > 1.9.1
> > > 
> > 
> > cheers,
> > -roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux