Configure pinctrl and a GPIO-controller board mux for LCD use. This allows the armadillo800eva board staging code to enable lcdc0. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- v2: - New. --- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 2e31d8c01cbf6a74..105d9c95de4af611 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -224,6 +224,9 @@ }; &pfc { + pinctrl-0 = <&lcd0_pins>; + pinctrl-names = "default"; + ether_pins: ether { renesas,groups = "gether_mii", "gether_int"; renesas,function = "gether"; @@ -259,6 +262,16 @@ "fsia_data_in_1", "fsia_data_out_0"; renesas,function = "fsia"; }; + + lcd0_pins: lcd0 { + renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; + renesas,function = "lcd0"; + + /* DBGMD/LCDC0/FSIA MUX */ + gpio-hog; + gpios = <176 0>; + output-high; + }; }; &tpu { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html