The A33 SoC uses the same musb controller as found on the A31 and later,
but allwinner has removed the configdata register, this commit adds special
handling for this.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt | 3 ++-
drivers/usb/musb/sunxi.c | 15 +++++++++++++++
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
index fde180b..862cd7c 100644
--- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
@@ -2,7 +2,8 @@ Allwinner sun4i A10 musb DRC/OTG controller
-------------------------------------------
Required properties:
- - compatible : "allwinner,sun4i-a10-musb" or "allwinner,sun6i-a31-musb"
+ - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb"
+ or "allwinner,sun8i-a33-musb"
- reg : mmio address range of the musb controller
- clocks : clock specifier for the musb controller ahb gate clock
- reset : reset specifier for the ahb reset (A31 and newer only)
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 825bc41..0e24292 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -73,6 +73,7 @@
#define SUNXI_MUSB_FL_PHY_ON 4
#define SUNXI_MUSB_FL_HAS_SRAM 5
#define SUNXI_MUSB_FL_HAS_RESET 6
+#define SUNXI_MUSB_FL_NO_CONFIGDATA 7
/* Our read/write methods need access and do not get passed in a musb ref :| */
struct musb *sunxi_musb;
@@ -370,6 +371,8 @@ static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset)
static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset)
{
+ struct sunxi_glue *glue;
+
if (addr == sunxi_musb->mregs) {
/* generic control or fifo control reg access */
switch (offset) {
@@ -392,6 +395,12 @@ static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset)
case MUSB_RXFIFOSZ:
return readb(addr + SUNXI_MUSB_RXFIFOSZ);
case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */
+ glue = dev_get_drvdata(sunxi_musb->controller->parent);
+ /* A33 saves a reg, and we get to hardcode this */
+ if (test_bit(SUNXI_MUSB_FL_NO_CONFIGDATA,
+ &glue->flags))
+ return 0xde;
+
return readb(addr + SUNXI_MUSB_CONFIGDATA);
/* Offset for these is fixed by sunxi_musb_busctl_offset() */
case SUNXI_MUSB_TXFUNCADDR:
@@ -643,6 +652,11 @@ static int sunxi_musb_probe(struct platform_device *pdev)
if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb"))
set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
+ if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb")) {
+ set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags);
+ set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags);
+ }
+
glue->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(glue->clk)) {
dev_err(&pdev->dev, "Error getting clock: %ld\n",
@@ -723,6 +737,7 @@ static int sunxi_musb_remove(struct platform_device *pdev)
static const struct of_device_id sunxi_musb_match[] = {
{ .compatible = "allwinner,sun4i-a10-musb", },
{ .compatible = "allwinner,sun6i-a31-musb", },
+ { .compatible = "allwinner,sun8i-a33-musb", },
{}
};
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
