This is Thermal Monitoring Unit for QorIQ platform.
Signed-off-by: Jia Hongtao <hongtao.jia@xxxxxxxxxxxxx>
---
Changes of V3:
* Put TMU node directly into t1040si-post.dtsi file.
* Add "fsl,tmu-range" property.
* Change "calibration" property to "fsl,tmu-calibration".
* Update the calibration data.
Changes of V2:
* Provide more details on compatible and calibration properties.
.../devicetree/bindings/thermal/qoriq-thermal.txt | 63 ++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 42 +++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
new file mode 100644
index 0000000..2bc9cb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
@@ -0,0 +1,63 @@
+* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
+
+Required properties:
+- compatible : Must include "fsl,qoriq-tmu". The version of the device is
+ determined by the TMU IP Block Revision Register (IPBRR0) at
+ offset 0x0BF8.
+ Table of correspondences between IPBRR0 values and example chips:
+ Value Device
+ ---------- -----
+ 0x01900102 T1040
+- reg : Address range of TMU registers.
+- interrupts : Contains the interrupt for TMU.
+- fsl,tmu-range : Temperature range for TMU. Including the starting
+ temperature and number of calibration points for each range.
+- fsl,tmu-calibration : Calibration table for TMU. This is required to
+ determine what a specific sensor reading translates to in degrees
+ Celsius. There are four calibration ranges, for each range we need
+ a couple of calibration data formatted like <TTCFGR, TSCFGR>.
+ Freescale provides the data required.
+
+Example:
+
+tmu@f0000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0xf0000 0x1000>;
+ interrupts = <18 2 0 0>;
+ fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
+ fsl,tmu-calibration = <0x00000000 0x00000025
+ 0x00000001 0x00000028
+ 0x00000002 0x0000002d
+ 0x00000003 0x00000031
+ 0x00000004 0x00000036
+ 0x00000005 0x0000003a
+ 0x00000006 0x00000040
+ 0x00000007 0x00000044
+ 0x00000008 0x0000004a
+ 0x00000009 0x0000004f
+ 0x0000000a 0x00000054
+
+ 0x00010000 0x0000000d
+ 0x00010001 0x00000013
+ 0x00010002 0x00000019
+ 0x00010003 0x0000001f
+ 0x00010004 0x00000025
+ 0x00010005 0x0000002d
+ 0x00010006 0x00000033
+ 0x00010007 0x00000043
+ 0x00010008 0x0000004b
+ 0x00010009 0x00000053
+
+ 0x00020000 0x00000010
+ 0x00020001 0x00000017
+ 0x00020002 0x0000001f
+ 0x00020003 0x00000029
+ 0x00020004 0x00000031
+ 0x00020005 0x0000003c
+ 0x00020006 0x00000042
+ 0x00020007 0x0000004d
+ 0x00020008 0x00000056
+
+ 0x00030000 0x00000012
+ 0x00030001 0x0000001d>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 5cc01be..6d9ca4d 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -407,6 +407,48 @@
reg = <0xea000 0x4000>;
};
+ tmu@f0000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0xf0000 0x1000>;
+ interrupts = <18 2 0 0>;
+ fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
+ fsl,tmu-calibration = <0x00000000 0x00000025
+ 0x00000001 0x00000028
+ 0x00000002 0x0000002d
+ 0x00000003 0x00000031
+ 0x00000004 0x00000036
+ 0x00000005 0x0000003a
+ 0x00000006 0x00000040
+ 0x00000007 0x00000044
+ 0x00000008 0x0000004a
+ 0x00000009 0x0000004f
+ 0x0000000a 0x00000054
+
+ 0x00010000 0x0000000d
+ 0x00010001 0x00000013
+ 0x00010002 0x00000019
+ 0x00010003 0x0000001f
+ 0x00010004 0x00000025
+ 0x00010005 0x0000002d
+ 0x00010006 0x00000033
+ 0x00010007 0x00000043
+ 0x00010008 0x0000004b
+ 0x00010009 0x00000053
+
+ 0x00020000 0x00000010
+ 0x00020001 0x00000017
+ 0x00020002 0x0000001f
+ 0x00020003 0x00000029
+ 0x00020004 0x00000031
+ 0x00020005 0x0000003c
+ 0x00020006 0x00000042
+ 0x00020007 0x0000004d
+ 0x00020008 0x00000056
+
+ 0x00030000 0x00000012
+ 0x00030001 0x0000001d>;
+ };
+
/include/ "elo3-dma-0.dtsi"
/include/ "elo3-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
--
2.1.0.27.g96db324
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
