tsout0 channel can be configured for either serial or parallel
data transfer. Both pin configurations are provided.
Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
arch/arm/boot/dts/stih407-pinctrl.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 87d0722..85cd9fc 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -567,6 +567,34 @@
};
};
};
+
+ tsout0 {
+ pinctrl_tsout0_parallel: tsout0_parallel {
+ st,pins {
+ DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+ VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsout0_serial: tsout0_serial {
+ st,pins {
+ DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+ VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
};
pin-controller-front1 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
