Re: [PATCH v5 11/42] powerpc/powernv: Increase PE# capacity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 06/04/2015 04:41 PM, Gavin Shan wrote:
Each PHB maintains an array helping to translate RID (Request
ID) to PE# with the assumption that PE# takes 8 bits, indicating
that we can't have more than 256 PEs. However, pci_dn->pe_number
already had 4-bytes for the PE#.

The patch extends the PE# capacity so that each of them will be
4-bytes long. Then we can use IODA_INVALID_PE to check one entry
in phb->pe_rmap[] is valid or not.

Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
v5:
   * Split from [PATCH v5 v4 06/21]
---
  arch/powerpc/platforms/powernv/pci-ioda.c | 5 ++++-
  arch/powerpc/platforms/powernv/pci.h      | 5 ++---
  2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 2087c5c..d8b0ef5 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -840,7 +840,7 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)

  	/* Clear the reverse map */
  	for (rid = pe->rid; rid < rid_end; rid++)
-		phb->ioda.pe_rmap[rid] = 0;
+		phb->ioda.pe_rmap[rid] = IODA_INVALID_PE;

  	/* Release from all parents PELT-V */
  	while (parent) {
@@ -3303,6 +3303,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
  	if (prop32)
  		phb->ioda.reserved_pe = be32_to_cpup(prop32);

+	/* Invalidate RID to PE# mapping */
+	memset(phb->ioda.pe_rmap, 0xff, sizeof(phb->ioda.pe_rmap));


Above you assign IODA_INVALID_PE in a loop and here you just do 0xff for the entire array. Have a loop here too and assign IODA_INVALID_PE to every entry:
for (i = 0; i < ARRAY_SIZE(phb->ioda.pe_rmap); ++i)
	phb->ioda.pe_rmap[i] = IODA_INVALID_PE;



+
  	/* Parse 64-bit MMIO range */
  	pnv_ioda_parse_m64_window(phb);

diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 94ef1df..590f778 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -175,11 +175,10 @@ struct pnv_phb {
  			struct list_head	pe_list;
  			struct mutex            pe_list_mutex;

-			/* Reverse map of PEs, will have to extend if
-			 * we are to support more than 256 PEs, indexed
+			/* Reverse map of PEs, indexed by
  			 * bus { bus, devfn }
  			 */
-			unsigned char		pe_rmap[0x10000];
+			int			pe_rmap[0x10000];


Most time most of the array will be empty and it is 256K per PHB... I understand we have quite a lot of RAM but still.



  			/* Number of 32-bit DMA segments */
  			unsigned long		dma32_segcount;



--
Alexey
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux