ChangeLog
v3:
- replace "Alternative Command Mode" by "Chip Select Active After Transfer" in
the DT bindings documentation. The "Alternative Command Mode" is a feature of
the I2C controller.
- rename somes "size" variables to "num_data" to ease the distinction between
the number of bytes and the number of data to transfer.
v2:
- read the Status Register to clear its RX FIFO Threshold Flag (RXFTHF) before
writing into the IER to enable the RXFTHF interrupt.
- remove the reset of the FIFO Mode Register (FMR) at the end of transfers
because setting the RX FIFO Threshold to 0 also sets the RXFTHF bit in SR.
- add a 3rd patch in the series to update the documentation of DT bindings.
v1:
This series of patches add support to features introduced by the Atmel sama5d2x
SoC
Cyrille Pitchen (3):
spi: atmel: add support for the internal chip-select of the spi
controller
spi: atmel: update DT bindings documentation
spi: atmel: add support to FIFOs
.../devicetree/bindings/spi/spi_atmel.txt | 8 +-
drivers/spi/spi-atmel.c | 292 +++++++++++++++++++--
2 files changed, 280 insertions(+), 20 deletions(-)
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
