From: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
To avoid duplicating the MB DTS file, move the MB intc entry into cpu
card specific file
Cc: Grant Likely <grant.likely@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>
---
arch/arc/boot/dts/axc001.dtsi | 21 +++++++++++++++++++++
arch/arc/boot/dts/axs10x_mb.dtsi | 17 -----------------
2 files changed, 21 insertions(+), 17 deletions(-)
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index 6990ca45fc7b..a5e2726a067e 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -69,6 +69,27 @@
};
};
+ /*
+ * This INTC is actually connected to DW APB GPIO
+ * which acts as a wire between MB INTC and CPU INTC.
+ * GPIO INTC is configured in platform init code
+ * and here we mimic direct connection from MB INTC to
+ * CPU INTC, thus we set "interrupts = <7>" instead of
+ * "interrupts = <12>"
+ *
+ * This intc actually resides on MB, but we move it here to
+ * avoid duplicating the MB dtsi file given that IRQ from
+ * this intc to cpu intc are different for axs101 and axs103
+ */
+ mb_intc: dw-apb-ictl@0xe0012000 {
+ #interrupt-cells = <1>;
+ compatible = "snps,dw-apb-ictl";
+ reg = < 0xe0012000 0x200 >;
+ interrupt-controller;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = < 7 >;
+ };
+
memory {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 5d06f1fb4266..f3db32154973 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -36,23 +36,6 @@
};
};
- /*
- * This INTC is actually connected to DW APB GPIO
- * which acts as a wire between MB INTC and CPU INTC.
- * GPIO INTC is configured in platform init code
- * and here we mimic direct connection from MB INTC to
- * CPU INTC, thus we set "interrupts = <7>" instead of
- * "interrupts = <12>"
- */
- mb_intc: dw-apb-ictl@0x12000 {
- #interrupt-cells = <1>;
- compatible = "snps,dw-apb-ictl";
- reg = < 0x12000 0x200 >;
- interrupt-controller;
- interrupt-parent = <&cpu_intc>;
- interrupts = < 7 >;
- };
-
ethernet@0x18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
