On Mon, Jun 08, 2015 at 08:41:13AM +0200, Uwe Kleine-König wrote: > >From reading the commit log I would expect that you only touch the > set_mctrl function, but not get_mctrl. Assuming your code change is > right, can you mention this in the commit log please? The bits > UARTMODEM_TXCTSE and UARTMODEM_RXRTSE only control the automatic mode? And... another point. UARTMODEM_TXCTSE and UARTMODEM_RXRTSE are the auto flow control _enable_ signals. That's not something that get_mctrl() should ever return. get_mctrl() is about reporting the actual current state of the CTS, DSR, DCD and RI signals _only_. If the hardware doesn't let you read the state, then reporting that CTS, DSR and DCD are all asserted is recommended, as that's the state needed to make the UART do useful stuff. So that part of this patch is the sane thing to do. What isn't sane is to use the auto-cts enable bit to report a ficticious current CTS state. -- FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html