Enable the OTG controller on the UTOO P66 tablet. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 514f159..3043aac 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -153,6 +153,10 @@ }; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc0_cd_pin_p66: mmc0_cd_pin@0 { allwinner,pins = "PG0"; @@ -161,6 +165,20 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + i2c_lcd_pins: i2c_lcd_pin@0 { allwinner,pins = "PG10", "PG12"; allwinner,function = "gpio_out"; @@ -219,7 +237,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; status = "okay"; -- 2.4.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html