Note these are added to the sun8i-a23.dtsi file rather then to the shared sun8i-a23-a33.dtsi file as both the phy and the otg controller on the a33 are slightly different. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- arch/arm/boot/dts/sun8i-a23.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 8698f7a..60fde9e 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -58,6 +58,38 @@ clock-output-names = "mbus"; }; }; + + soc@01c00000 { + usb_otg: usb@01c19000 { + compatible = "allwinner,sun6i-a31-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ahb1_gates 24>; + resets = <&ahb1_rst 24>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-a23-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu1"; + clocks = <&usb_clk 8>, + <&usb_clk 9>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&usb_clk 0>, + <&usb_clk 1>; + reset-names = "usb0_reset", + "usb1_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + }; }; &pio { -- 2.4.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html