> -----Original Message----- > From: Bastien Nocera [mailto:hadess@xxxxxxxxxx] > Sent: 04 June, 2015 16:05 > To: Tirdea, Irina > Cc: Dmitry Torokhov; linux-input@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > Subject: Re: [PATCH 0/9] Goodix touchscreen enhancements > > Hey Irina, > Hi Bastien, > On Thu, 2015-05-28 at 15:47 +0300, Irina Tirdea wrote: > > Add several enhancements to the Goodix touchscreen driver: > > - write configuration data to the device > > - power management support > > - cleanup and refactoring > > > > Irina Tirdea (9): > > input: goodix: fix alignment issues > > input: goodix: fix variable length array warning > > input: goodix: export id and version read from device > > input: goodix: add ACPI IDs for GT911 and GT9271 > > input: goodix: reset device at init > > input: goodix: write configuration data to device > > input: goodix: add power management support > > input: goodix: add support for ESD > > input: goodix: use goodix_i2c_write_u8 instead of i2c_master_send > > Thanks a lot of that patch series. I was travelling when you sent it, > but I should be able to test the patch series quicker when you send a > v2. Thanks for the review and for offering to test the patches. I will send v2 asap. > > Could you please also add some references to hardware that you're > enabling (and presumably have been testing on) to the driver's Kconfig? > If the hardware is still not public, any sort of other reference would > be useful (Windows 8 compatible harwdare? Hardware that usually runs a > particular Android vendor tree?...) I have been using a custom setup by connecting the touchscreen directly to a virtual Linux environment through an USB-I2C adapter (https://diolan.com/dln-2). This is how I could test both ACPI and DT configurations and why the ACPI IDs I used do not correspond to an actual device. I have also done tests for the main functionality (writing config, reset, suspend/resume, ESD) on an Android tablet. Unfortunately the HW is not public and neither is the Android tree. There is an Android tree publicly available at https://01.org/android-ia, but it is quite different from the internal tree I am using. I can add a reference in Kconfig that this driver supports chip models that can be found on Intel tablets running Android. Thanks, Irina > > Cheers ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
