On Fri, 2015-06-05 at 06:37PM +0530, Ranjit Waghmode wrote: > Add bindings documentation for GQSPI controller driver used by > Zynq Ultrascale+ MPSoC > > Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx> > --- > No changes in v2 > --- > .../devicetree/bindings/spi/spi-zynqmp-qspi.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt > > diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt > new file mode 100644 > index 0000000..cec6330 > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt > @@ -0,0 +1,26 @@ > +Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings > +------------------------------------------------------------------- > + > +Required properties: > +- compatible : Should be "xlnx,zynqmp-qspi-1.0". > +- reg : Physical base address and size of GQSPI registers map. > +- interrupts : Property with a value describing the interrupt > + number. > +- interrupt-parent : Must be core interrupt controller. > +- clock-names : List of input clock names - "ref_clk", "pclk" > + (See clock bindings for details). > +- clocks : Clock phandles (see clock bindings for details). > + > +Optional properties: > +- num-cs : Number of chip selects used. > + > +Example: > + qspi: spi@ff0f0000 { > + compatible = "xlnx,zynqmp-qspi-1.0"; > + clock-names = "ref_clk", "pclk"; > + clocks = <&misc_clk &misc_clk>; > + interrupts = <0 15 4>; > + interrupt-parent = <&gic>; > + num-cs = <1>; > + reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>; Please make this reg = <0x0 0xff0f0000 0x1000>, <0x0 0xc0000000 0x8000000>; Sören -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html