From: Stephen Barber <smbarber@xxxxxxxxxxxx>
Update cros_ec_commands.h to the latest version in the EC
firmware sources and add power domain and passthru commands.
Also, update lightbar to use new command names.
Signed-off-by: Stephen Barber <smbarber@xxxxxxxxxxxx>
Reviewed-by: Randall Spangler <rspangler@xxxxxxxxxxxx>
Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
Reviewed-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
Tested-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
Changes since v4: None
Changes since v3: None
Changes since v2: None
Changes since v1:
- Added Gwendal Grignou and Heiko Stuebner Tested-by tags
- Added Gwendal Grignou Reviewed-by tag
- Added Lee Jones Acked-by tag
---
drivers/platform/chrome/cros_ec_lightbar.c | 14 +-
include/linux/mfd/cros_ec_commands.h | 277 ++++++++++++++++++++++++++---
2 files changed, 262 insertions(+), 29 deletions(-)
diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
index 560e5d41b7ae..6e1986a2dce1 100644
--- a/drivers/platform/chrome/cros_ec_lightbar.c
+++ b/drivers/platform/chrome/cros_ec_lightbar.c
@@ -197,8 +197,8 @@ static ssize_t brightness_store(struct device *dev,
return -ENOMEM;
param = (struct ec_params_lightbar *)msg->data;
- param->cmd = LIGHTBAR_CMD_BRIGHTNESS;
- param->brightness.num = val;
+ param->cmd = LIGHTBAR_CMD_SET_BRIGHTNESS;
+ param->set_brightness.num = val;
ret = lb_throttle();
if (ret)
goto exit;
@@ -253,11 +253,11 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr,
if (i == 4) {
param = (struct ec_params_lightbar *)msg->data;
- param->cmd = LIGHTBAR_CMD_RGB;
- param->rgb.led = val[0];
- param->rgb.red = val[1];
- param->rgb.green = val[2];
- param->rgb.blue = val[3];
+ param->cmd = LIGHTBAR_CMD_SET_RGB;
+ param->set_rgb.led = val[0];
+ param->set_rgb.red = val[1];
+ param->set_rgb.green = val[2];
+ param->set_rgb.blue = val[3];
/*
* Throttle only the first of every four transactions,
* so that the user can update all four LEDs at once.
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index a49cd41feea7..13b630c10d4c 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -515,7 +515,7 @@ struct ec_host_response {
/*
* Notes on commands:
*
- * Each command is an 8-byte command value. Commands which take params or
+ * Each command is an 16-bit command value. Commands which take params or
* return response data specify structs for that data. If no struct is
* specified, the command does not input or output data, respectively.
* Parameter/response length is implicit in the structs. Some underlying
@@ -966,7 +966,7 @@ struct rgb_s {
/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a
* host command, but the alignment is the same regardless. Keep it that way.
*/
-struct lightbar_params {
+struct lightbar_params_v0 {
/* Timing */
int32_t google_ramp_up;
int32_t google_ramp_down;
@@ -1000,32 +1000,81 @@ struct lightbar_params {
struct rgb_s color[8]; /* 0-3 are Google colors */
} __packed;
+struct lightbar_params_v1 {
+ /* Timing */
+ int32_t google_ramp_up;
+ int32_t google_ramp_down;
+ int32_t s3s0_ramp_up;
+ int32_t s0_tick_delay[2]; /* AC=0/1 */
+ int32_t s0a_tick_delay[2]; /* AC=0/1 */
+ int32_t s0s3_ramp_down;
+ int32_t s3_sleep_for;
+ int32_t s3_ramp_up;
+ int32_t s3_ramp_down;
+ int32_t tap_tick_delay;
+ int32_t tap_display_time;
+
+ /* Tap-for-battery params */
+ uint8_t tap_pct_red;
+ uint8_t tap_pct_green;
+ uint8_t tap_seg_min_on;
+ uint8_t tap_seg_max_on;
+ uint8_t tap_seg_osc;
+ uint8_t tap_idx[3];
+
+ /* Oscillation */
+ uint8_t osc_min[2]; /* AC=0/1 */
+ uint8_t osc_max[2]; /* AC=0/1 */
+ uint8_t w_ofs[2]; /* AC=0/1 */
+
+ /* Brightness limits based on the backlight and AC. */
+ uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_min[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_max[2]; /* AC=0/1 */
+
+ /* Battery level thresholds */
+ uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+
+ /* Map [AC][battery_level] to color index */
+ uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
+ uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
+
+ /* Color palette */
+ struct rgb_s color[8]; /* 0-3 are Google colors */
+} __packed;
+
struct ec_params_lightbar {
uint8_t cmd; /* Command (see enum lightbar_command) */
union {
struct {
/* no args */
- } dump, off, on, init, get_seq, get_params, version;
+ } dump, off, on, init, get_seq, get_params_v0, get_params_v1,
+ version, get_brightness, get_demo;
- struct num {
+ struct {
uint8_t num;
- } brightness, seq, demo;
+ } set_brightness, seq, demo;
- struct reg {
+ struct {
uint8_t ctrl, reg, value;
} reg;
- struct rgb {
+ struct {
uint8_t led, red, green, blue;
- } rgb;
+ } set_rgb;
+
+ struct {
+ uint8_t led;
+ } get_rgb;
- struct lightbar_params set_params;
+ struct lightbar_params_v0 set_params_v0;
+ struct lightbar_params_v1 set_params_v1;
};
} __packed;
struct ec_response_lightbar {
union {
- struct dump {
+ struct {
struct {
uint8_t reg;
uint8_t ic0;
@@ -1033,20 +1082,26 @@ struct ec_response_lightbar {
} vals[23];
} dump;
- struct get_seq {
+ struct {
uint8_t num;
- } get_seq;
+ } get_seq, get_brightness, get_demo;
- struct lightbar_params get_params;
+ struct lightbar_params_v0 get_params_v0;
+ struct lightbar_params_v1 get_params_v1;
- struct version {
+ struct {
uint32_t num;
uint32_t flags;
} version;
struct {
+ uint8_t red, green, blue;
+ } get_rgb;
+
+ struct {
/* no return params */
- } off, on, init, brightness, seq, reg, rgb, demo, set_params;
+ } off, on, init, set_brightness, seq, reg, set_rgb,
+ demo, set_params_v0, set_params_v1;
};
} __packed;
@@ -1056,15 +1111,20 @@ enum lightbar_command {
LIGHTBAR_CMD_OFF = 1,
LIGHTBAR_CMD_ON = 2,
LIGHTBAR_CMD_INIT = 3,
- LIGHTBAR_CMD_BRIGHTNESS = 4,
+ LIGHTBAR_CMD_SET_BRIGHTNESS = 4,
LIGHTBAR_CMD_SEQ = 5,
LIGHTBAR_CMD_REG = 6,
- LIGHTBAR_CMD_RGB = 7,
+ LIGHTBAR_CMD_SET_RGB = 7,
LIGHTBAR_CMD_GET_SEQ = 8,
LIGHTBAR_CMD_DEMO = 9,
- LIGHTBAR_CMD_GET_PARAMS = 10,
- LIGHTBAR_CMD_SET_PARAMS = 11,
+ LIGHTBAR_CMD_GET_PARAMS_V0 = 10,
+ LIGHTBAR_CMD_SET_PARAMS_V0 = 11,
LIGHTBAR_CMD_VERSION = 12,
+ LIGHTBAR_CMD_GET_BRIGHTNESS = 13,
+ LIGHTBAR_CMD_GET_RGB = 14,
+ LIGHTBAR_CMD_GET_DEMO = 15,
+ LIGHTBAR_CMD_GET_PARAMS_V1 = 16,
+ LIGHTBAR_CMD_SET_PARAMS_V1 = 17,
LIGHTBAR_NUM_CMDS
};
@@ -1421,8 +1481,40 @@ struct ec_response_rtc {
/*****************************************************************************/
/* Port80 log access */
+/* Maximum entries that can be read/written in a single command */
+#define EC_PORT80_SIZE_MAX 32
+
/* Get last port80 code from previous boot */
#define EC_CMD_PORT80_LAST_BOOT 0x48
+#define EC_CMD_PORT80_READ 0x48
+
+enum ec_port80_subcmd {
+ EC_PORT80_GET_INFO = 0,
+ EC_PORT80_READ_BUFFER,
+};
+
+struct ec_params_port80_read {
+ uint16_t subcmd;
+ union {
+ struct {
+ uint32_t offset;
+ uint32_t num_entries;
+ } read_buffer;
+ };
+} __packed;
+
+struct ec_response_port80_read {
+ union {
+ struct {
+ uint32_t writes;
+ uint32_t history_size;
+ uint32_t last_boot;
+ } get_info;
+ struct {
+ uint16_t codes[EC_PORT80_SIZE_MAX];
+ } data;
+ };
+} __packed;
struct ec_response_port80_last_boot {
uint16_t code;
@@ -1782,6 +1874,7 @@ struct ec_params_gpio_set {
/* Get GPIO value */
#define EC_CMD_GPIO_GET 0x93
+/* Version 0 of input params and response */
struct ec_params_gpio_get {
char name[32];
} __packed;
@@ -1789,6 +1882,38 @@ struct ec_response_gpio_get {
uint8_t val;
} __packed;
+/* Version 1 of input params and response */
+struct ec_params_gpio_get_v1 {
+ uint8_t subcmd;
+ union {
+ struct {
+ char name[32];
+ } get_value_by_name;
+ struct {
+ uint8_t index;
+ } get_info;
+ };
+} __packed;
+
+struct ec_response_gpio_get_v1 {
+ union {
+ struct {
+ uint8_t val;
+ } get_value_by_name, get_count;
+ struct {
+ uint8_t val;
+ char name[32];
+ uint32_t flags;
+ } get_info;
+ };
+} __packed;
+
+enum gpio_get_subcmd {
+ EC_GPIO_GET_BY_NAME = 0,
+ EC_GPIO_GET_COUNT = 1,
+ EC_GPIO_GET_INFO = 2,
+};
+
/*****************************************************************************/
/* I2C commands. Only available when flash write protect is unlocked. */
@@ -1857,13 +1982,21 @@ struct ec_params_charge_control {
/*****************************************************************************/
/*
- * Cut off battery power output if the battery supports.
+ * Cut off battery power immediately or after the host has shut down.
*
- * For unsupported battery, just don't implement this command and lets EC
- * return EC_RES_INVALID_COMMAND.
+ * return EC_RES_INVALID_COMMAND if unsupported by a board/battery.
+ * EC_RES_SUCCESS if the command was successful.
+ * EC_RES_ERROR if the cut off command failed.
*/
+
#define EC_CMD_BATTERY_CUT_OFF 0x99
+#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0)
+
+struct ec_params_battery_cutoff {
+ uint8_t flags;
+} __packed;
+
/*****************************************************************************/
/* USB port mux control. */
@@ -2142,6 +2275,32 @@ struct ec_params_sb_wr_block {
} __packed;
/*****************************************************************************/
+/* Battery vendor parameters
+ *
+ * Get or set vendor-specific parameters in the battery. Implementations may
+ * differ between boards or batteries. On a set operation, the response
+ * contains the actual value set, which may be rounded or clipped from the
+ * requested value.
+ */
+
+#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4
+
+enum ec_battery_vendor_param_mode {
+ BATTERY_VENDOR_PARAM_MODE_GET = 0,
+ BATTERY_VENDOR_PARAM_MODE_SET,
+};
+
+struct ec_params_battery_vendor_param {
+ uint32_t param;
+ uint32_t value;
+ uint8_t mode;
+} __packed;
+
+struct ec_response_battery_vendor_param {
+ uint32_t value;
+} __packed;
+
+/*****************************************************************************/
/* System commands */
/*
@@ -2338,6 +2497,80 @@ struct ec_params_reboot_ec {
/*****************************************************************************/
/*
+ * PD commands
+ *
+ * These commands are for PD MCU communication.
+ */
+
+/* EC to PD MCU exchange status command */
+#define EC_CMD_PD_EXCHANGE_STATUS 0x100
+
+/* Status of EC being sent to PD */
+struct ec_params_pd_status {
+ int8_t batt_soc; /* battery state of charge */
+} __packed;
+
+/* Status of PD being sent back to EC */
+struct ec_response_pd_status {
+ int8_t status; /* PD MCU status */
+ uint32_t curr_lim_ma; /* input current limit */
+} __packed;
+
+/* Set USB type-C port role and muxes */
+#define EC_CMD_USB_PD_CONTROL 0x101
+
+enum usb_pd_control_role {
+ USB_PD_CTRL_ROLE_NO_CHANGE = 0,
+ USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */
+ USB_PD_CTRL_ROLE_TOGGLE_OFF = 2,
+ USB_PD_CTRL_ROLE_FORCE_SINK = 3,
+ USB_PD_CTRL_ROLE_FORCE_SOURCE = 4,
+};
+
+enum usb_pd_control_mux {
+ USB_PD_CTRL_MUX_NO_CHANGE = 0,
+ USB_PD_CTRL_MUX_NONE = 1,
+ USB_PD_CTRL_MUX_USB = 2,
+ USB_PD_CTRL_MUX_DP = 3,
+ USB_PD_CTRL_MUX_DOCK = 4,
+ USB_PD_CTRL_MUX_AUTO = 5,
+};
+
+struct ec_params_usb_pd_control {
+ uint8_t port;
+ uint8_t role;
+ uint8_t mux;
+} __packed;
+
+/*****************************************************************************/
+/*
+ * Passthru commands
+ *
+ * Some platforms have sub-processors chained to each other. For example.
+ *
+ * AP <--> EC <--> PD MCU
+ *
+ * The top 2 bits of the command number are used to indicate which device the
+ * command is intended for. Device 0 is always the device receiving the
+ * command; other device mapping is board-specific.
+ *
+ * When a device receives a command to be passed to a sub-processor, it passes
+ * it on with the device number set back to 0. This allows the sub-processor
+ * to remain blissfully unaware of whether the command originated on the next
+ * device up the chain, or was passed through from the AP.
+ *
+ * In the above example, if the AP wants to send command 0x0002 to the PD MCU,
+ * AP sends command 0x4002 to the EC
+ * EC sends command 0x0002 to the PD MCU
+ * EC forwards PD MCU response back to the AP
+ */
+
+/* Offset and max command number for sub-device n */
+#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n))
+#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff)
+
+/*****************************************************************************/
+/*
* Deprecated constants. These constants have been renamed for clarity. The
* meaning and size has not changed. Programs that use the old names should
* switch to the new names soon, as the old names may not be carried forward
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
