Hello.
On 06/02/2015 07:49 PM, Cyrille Pitchen wrote:
This patches documents the new bindings for the Flexcom clock, which will
be introduced by Atmel sama5d2x chips.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
---
.../devicetree/bindings/clock/at91-clock.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 7a4d492..df4f40b 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
[...]
@@ -461,3 +464,20 @@ For example:
compatible = "atmel,sama5d4-clk-h32mx";
clocks = <&mck>;
};
+
+Required properties for flexcom clock:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the Flexcom peripheral clock from PMC.
+- reg : shall be the range for Flexcom dedicated I/O registers (without USART,
+ TWI or SPI registers).
+- atmel,flexcom-mode : shall be a string value among { "spi", "usart", "i2c",
+ "twi" }. "i2c" and "twi" are synonymous.
+
+For example:
+ flx0: flexcom@f8034000 {
The ePAPR standard says: "The name of a node should be somewhat generic,
reflecting the function of the device and not its precise programming model."
[...]
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
