Hi Cyrille,
For the whole serie:
Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
If you send a new version, could you add stable in Cc to patch 3/6:
Cc: stable@xxxxxxxxxxxxxxx #3.10 and later
If not, Wolfram could you do it please?
Thanks
Ludovic
On Tue, Jun 02, 2015 at 03:18:30PM +0200, Cyrille Pitchen wrote:
> ChangeLog
>
> v3:
> - fix braces {} coding style issue
> - split the alternative command patch into 2 patches: the first one fixes
> a race condition whereas the second one is the actual alternative command
> patch
>
> v2:
> - fix typo in comment for AT91_TWI_SVEN.
> - document new device tree bindings like "atmel,fifo-size".
> - explicitly set the has_alt_cmd boolean to false to already existing chip
> configs.
> - use the BIT() macro to define the register bits and do a little cleanup in a
> dedicated patch.
> - reword some comments to better explain why the TXCOMP interrupt is no longer
> enabled in at91_do_twi_transfer() but later in
> at91_twi_write_data_dma_callback() to avoid a race condition when DMA is used.
> - remove useless TXCOMP interrupt enable line in at91_twi_write_next_byte()
> since this interrupt is also enabled by at91_do_twi_transfer() for PIO
> transfers.
>
> v1:
> This series of patches adds support of two new features which will be
> introduced with Atmel sama5d2x SoC.
>
> First, the alternative command mode eases the sending of STOP conditions.
> Before starting an I2C transaction, the size data to be transfered is
> written into the new Alternative Command Register. For each byte transferred,
> the I2C controller decreases this counter and automatically sends a STOP
> condition when the counter value reaches 0, that is to say when the last byte
> of the transaction has been sent/received. So there is no longer need to set
> the STOP bit into the Control Register.
>
> Then the use of FIFOs allows to reduce number I/O accesses: for instance,
> the TX FIFO allows to write up to 4 data in a single access to the Transmit
> Holding Register. Also the RX FIFO allows to read up to 4 data in a single
> access to the Receive Holding Register. Currently only DMA transfers take
> advantage of FIFOs.
>
> Cyrille Pitchen (6):
> i2c: at91: use BIT() macro to define register bits
> i2c: at91: update documentation for DT bindings
> i2c: at91: fix a race condition when using the DMA controller
> i2c: at91: add support for new alternative command mode
> i2c: at91: print hardware version
> i2c: at91: add support to FIFOs
>
> Documentation/devicetree/bindings/i2c/i2c-at91.txt | 29 +-
> drivers/i2c/busses/i2c-at91.c | 354 +++++++++++++++++----
> 2 files changed, 321 insertions(+), 62 deletions(-)
>
> --
> 1.8.2.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
