The IRQB of S2MPS11 PMIC is wired to XEINT4 (GPX0-4) through pull-up
resistor.
Add interrupt properties and pinctrl configuration to enable RTC wake
alarm of rtc-s5m driver. This also removes a warning:
sec_pmic 4-0066: No interrupt specified, no interrupts
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
Reviewed-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---
Changes since v1:
1. Choose proper pinctrl node for gpx0-4: this should be pinctrl_0, not
pinctrl_1.
2. Add Javier's reviewed-by.
---
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index c16987950aa1..1df2f38e2fcb 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5800.dtsi"
@@ -153,6 +154,11 @@
s2mps11,buck3-ramp-enable = <1>;
s2mps11,buck4-ramp-enable = <1>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
s2mps11_osc: clocks {
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
@@ -464,6 +470,13 @@
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
+
+ s2mps11_irq: s2mps11-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
&pinctrl_1 {
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
