This patch set adds support for the internal USB OTG PHY found on NXP LPC18xx and LPC43xx devices. Driver takes care of enabling the PHY and setting the clock rate which is need for USB0 support on this platform. This version address the comments from Kishon Vijay Abraham I. Changes in v3: - depend on MFD_SYSCON Changes in v2: - use PTR_ERR_OR_ZERO in phy driver - rename binding doc - update doc commit message Base support for this platform can now be found in arm-soc next. Joachim Eastwood (2): phy: add lpc18xx usb otg phy driver phy: dt bindings: add XP LPC18xx/43xx USB OTG PHY bindings .../bindings/phy/phy-lpc18xx-usb-otg.txt | 19 +++ drivers/phy/Kconfig | 11 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-lpc18xx-usb-otg.c | 143 +++++++++++++++++++++ 4 files changed, 174 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt create mode 100644 drivers/phy/phy-lpc18xx-usb-otg.c -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html