Add PHY binding for Marvell PXA1928 SOC's USB and HSIC PHYs.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
.../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
new file mode 100644
index 0000000..660a13c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
@@ -0,0 +1,18 @@
+* Marvell PXA1928 USB and HSIC PHYs
+
+Required properties:
+- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
+- reg: base address and length of the registers
+- clocks - A single clock. From common clock binding.
+- #phys-cells: should be 0. From commmon phy binding.
+- resets: reference to the reset controller
+
+Example:
+
+ usbphy: phy@7000 {
+ compatible = "marvell,pxa1928-usb-phy";
+ reg = <0x7000 0xe0>;
+ clocks = <&apmu_clocks PXA1928_CLK_USB>;
+ #phy-cells = <0>;
+ };
+
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
