Re: [PATCHv2] ARM: dts: odroidxu3: Enable USB3 regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello Anand,

On Fri, May 29, 2015 at 3:34 PM, Anand Moon <linux.amoon@xxxxxxxxx> wrote:
> Enable regulator for usbdrd3_0 and usbdrd3_1.
> Looking at the schematic pin diagram for MAX77802
> USB3_0 and USB3_1 is regulated by LDO9 and LD011.
>
> Fix the boot message of failed.
> [    3.503539] exynos-dwc3 usb@12000000: Looking up vdd33-supply from device tree
> [    3.503556] exynos-dwc3 usb@12000000: Looking up vdd33-supply property in node /usb@12000000 failed
> [    3.503568] usb@12000000 supply vdd33 not found, using dummy regulator
> [    3.509154] exynos-dwc3 usb@12000000: Looking up vdd10-supply from device tree
> [    3.509170] exynos-dwc3 usb@12000000: Looking up vdd10-supply property in node /usb@12000000 failed
> [    3.509181] usb@12000000 supply vdd10 not found, using dummy regulator
> [    3.917548] exynos-dwc3 usb@12400000: Looking up vdd33-supply from device tree
> [    3.917565] exynos-dwc3 usb@12400000: Looking up vdd33-supply property in node /usb@12400000 failed
> [    3.917578] usb@12400000 supply vdd33 not found, using dummy regulator
> [    3.922731] exynos-dwc3 usb@12400000: Looking up vdd10-supply from device tree
> [    3.922747] exynos-dwc3 usb@12400000: Looking up vdd10-supply property in node /usb@12400000 failed
>
> ---
> This patch is based on Krzysztof github branch work-next/odroid-xu3-s2mps11-irq.
> v2 - Fixed the comment.
> ---
>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/exynos5422-odroidxu3.dts | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>

Your commit message is again not correct. Sorry if this is a long
explanation but I want you to understand how the git tools work.

What git am and other git tools do is to strip any text that is
between the first "---" and the actual diff. With git format-patch the
information that is placed there by default is the file(s) diffstat
since that is a useful information for someone reviewing your patches
but not so to be part of the commit message, you can get it anyways
later with git $commitId --stat.

So what people do is to add information after the first "---" that is
relevant for reviewers but don't want to end the commit message.
Usually this is the patch change history but it can contain any other
information like links to previous patches, dependencies posted
previously, etc.

With your current patch, that means that git am will strip your
Signed-off-by and Krzysztof's Tested-by tags which should be part of
the commit message.

Krzysztof already mentioned but a good exercise would be to generate
your patch with git format-patch and then apply again with git am to
see if the end result is what you were expecting for.

Hope it helps,
Javier
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux