W dniu 28.05.2015 o 17:58, Anand Moon pisze: > Enable regulator for usbdrd3_0 and usbdrd3_1 > From the schematic pin diagram USB3_0 and USB3_1 > is regulated by LDO9 and LD011. > > Fix the boot message of failed. > [ 3.503539] exynos-dwc3 usb@12000000: Looking up vdd33-supply from device tree > [ 3.503556] exynos-dwc3 usb@12000000: Looking up vdd33-supply property in node /usb@12000000 failed > [ 3.503568] usb@12000000 supply vdd33 not found, using dummy regulator > [ 3.509154] exynos-dwc3 usb@12000000: Looking up vdd10-supply from device tree > [ 3.509170] exynos-dwc3 usb@12000000: Looking up vdd10-supply property in node /usb@12000000 failed > [ 3.509181] usb@12000000 supply vdd10 not found, using dummy regulator > [ 3.917548] exynos-dwc3 usb@12400000: Looking up vdd33-supply from device tree > [ 3.917565] exynos-dwc3 usb@12400000: Looking up vdd33-supply property in node /usb@12400000 failed > [ 3.917578] usb@12400000 supply vdd33 not found, using dummy regulator > [ 3.922731] exynos-dwc3 usb@12400000: Looking up vdd10-supply from device tree > [ 3.922747] exynos-dwc3 usb@12400000: Looking up vdd10-supply property in node /usb@12400000 failed > Tested on Odroid XU3-Lite board: Tested-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html