Le 05/28/15 18:42, Mathieu Olivari a écrit :
> Add device-tree binding for ar8xxx switch families.
>
> Signed-off-by: Mathieu Olivari <mathieu@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/net/dsa/qca-ar8xxx.txt | 70 ++++++++++++++++++++++
> 1 file changed, 70 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/dsa/qca-ar8xxx.txt
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca-ar8xxx.txt b/Documentation/devicetree/bindings/net/dsa/qca-ar8xxx.txt
> new file mode 100644
> index 0000000..f4fd3f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/dsa/qca-ar8xxx.txt
> @@ -0,0 +1,70 @@
> +* Qualcomm Atheros AR8xxx switch family
> +
> +Required properties:
> +
> +- compatible: should be "qca,ar8xxx"
> +- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
> +- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
> +- #size-cells: must be 0
> +- #address-cells: must be 2, see dsa/dsa.txt
> +
> +Subnodes:
> +
> +The integrated switch subnode should be specified according to the binding
> +described in dsa/dsa.txt.
> +
> +Optional properties:
> +
> +- qca,port6-phy-mode: if specified, the driver will configure Port 6 in the
> + given phy-mode. See Documentation/devicetree/bindings/net/ethernet.txt for
> + the list of valid phy-mode.
Is there a reason why this is a custom property and not a standard
"phy-mode" property here such that you could utilize of_get_phy_mode()
with this directly?
> +
> +- qca,port6-phy-id: if specified, the driver will connect Port 6 to the PHY
> + given as a parameter. In this case, Port6 and the corresponding PHY will be
> + isolated from the rest of the switch. From a system perspective, they will
> + act as a regular PHY.
Same here, is there a reason why this is not a "phy-handle" property to
a PHY node that sits on a (potentially different) MDIO bus?
> +
> +Example:
> +
> + dsa@0 {
> + compatible = "qca,ar8xxx";
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + dsa,ethernet = <ðernet0>;
> + dsa,mii-bus = <&mii_bus0>;
> +
> + switch@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0 0>; /* MDIO address 0, switch 0 in tree */
> +
> + qca,port6-phy-mode = "sgmii";
> + qca,port6-phy-id = <4>;
> +
> + port@0 {
> + reg = <11>;
> + label = "cpu";
> + };
> +
> + port@1 {
> + reg = <0>;
> + label = "lan1";
> + };
> +
> + port@2 {
> + reg = <1>;
> + label = "lan2";
> + };
> +
> + port@3 {
> + reg = <2>;
> + label = "lan3";
> + };
> +
> + port@4 {
> + reg = <3>;
> + label = "lan4";
> + };
> + };
> + };
>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
