Signed-off-by: Joachim Eastwood <manabian@xxxxxxxxx> --- arch/arm/boot/dts/lpc18xx.dtsi | 85 ++++++++++++++++++++++++++------ arch/arm/boot/dts/lpc4350-hitex-eval.dts | 4 -- 2 files changed, 71 insertions(+), 18 deletions(-) diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 204da5b52ef9..78292d0cb263 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -13,6 +13,9 @@ #include "armv7-m.dtsi" +#include "dt-bindings/clock/lpc18xx-cgu.h" +#include "dt-bindings/clock/lpc18xx-ccu.h" + / { cpus { #address-cells = <1>; @@ -22,6 +25,7 @@ compatible = "arm,cortex-m3"; device_type = "cpu"; reg = <0x0>; + clocks = <&ccu1 CLK_CPU_CORE>; }; }; @@ -32,23 +36,76 @@ clock-frequency = <12000000>; }; - /* Temporary hardcode PLL1 until clk drivers are merged */ - pll1: pll1 { - compatible = "fixed-factor-clock"; - clocks = <&xtal>; + xtal32: xtal32 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + enet_rx_clk: enet_rx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_rx_clk"; + }; + + enet_tx_clk: enet_tx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_tx_clk"; + }; + + gp_clkin: gp_clkin { + compatible = "fixed-clock"; #clock-cells = <0>; - clock-div = <1>; - clock-mult = <12>; + clock-frequency = <0>; + clock-output-names = "gp_clkin"; }; }; soc { + cgu: clock-controller@40050000 { + compatible = "nxp,lpc1850-cgu"; + reg = <0x40050000 0x1000>; + #clock-cells = <1>; + clocks = <&xtal>, <&xtal32>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + }; + + ccu1: clock-controller@40051000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40051000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, + <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, + <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, + <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; + clock-names = "base_apb3_clk", "base_apb1_clk", + "base_spifi_clk", "base_cpu_clk", + "base_periph_clk", "base_usb0_clk", + "base_usb1_clk", "base_spi_clk"; + }; + + ccu2: clock-controller@40052000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40052000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, + <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, + <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, + <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; + clock-names = "base_audio_clk", "base_uart3_clk", + "base_uart2_clk", "base_uart1_clk", + "base_uart0_clk", "base_ssp1_clk", + "base_ssp0_clk", "base_sdio_clk"; + }; + uart0: serial@40081000 { compatible = "ns16550a"; reg = <0x40081000 0x1000>; reg-shift = <2>; interrupts = <24>; - clocks = <&pll1>; + clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; status = "disabled"; }; @@ -57,7 +114,7 @@ reg = <0x40082000 0x1000>; reg-shift = <2>; interrupts = <25>; - clocks = <&pll1>; + clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; status = "disabled"; }; @@ -65,7 +122,7 @@ compatible = "nxp,lpc3220-timer"; reg = <0x40084000 0x1000>; interrupts = <12>; - clocks = <&pll1>; + clocks = <&ccu1 CLK_CPU_TIMER0>; clock-names = "timerclk"; }; @@ -73,7 +130,7 @@ compatible = "nxp,lpc3220-timer"; reg = <0x40085000 0x1000>; interrupts = <13>; - clocks = <&pll1>; + clocks = <&ccu1 CLK_CPU_TIMER1>; clock-names = "timerclk"; }; @@ -82,7 +139,7 @@ reg = <0x400c1000 0x1000>; reg-shift = <2>; interrupts = <26>; - clocks = <&pll1>; + clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; status = "disabled"; }; @@ -91,7 +148,7 @@ reg = <0x400c2000 0x1000>; reg-shift = <2>; interrupts = <27>; - clocks = <&pll1>; + clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; status = "disabled"; }; @@ -99,7 +156,7 @@ compatible = "nxp,lpc3220-timer"; reg = <0x400c3000 0x1000>; interrupts = <14>; - clocks = <&pll1>; + clocks = <&ccu1 CLK_CPU_TIMER2>; clock-names = "timerclk"; }; @@ -107,7 +164,7 @@ compatible = "nxp,lpc3220-timer"; reg = <0x400c4000 0x1000>; interrupts = <15>; - clocks = <&pll1>; + clocks = <&ccu1 CLK_CPU_TIMER3>; clock-names = "timerclk"; }; }; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index d04072f40817..4ebdb54cc9ce 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -36,10 +36,6 @@ }; }; -&pll1 { - clock-mult = <15>; -}; - &uart0 { status = "okay"; }; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html