Hi, On 16/05/2015 at 00:35:29 +0200, Philippe Reynes wrote : > The mxc RTC needs two clocks, one for the input > reference, and one for the IP. But this driver > was only using one clock (for the reference). > This patch add the second clock (for the IP). > > Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx> > --- > arch/arm/mach-imx/clk-imx31.c | 3 ++- > drivers/rtc/rtc-mxc.c | 26 +++++++++++++++++--------- > 2 files changed, 19 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c > index 286ef42..480c54f 100644 > --- a/arch/arm/mach-imx/clk-imx31.c > +++ b/arch/arm/mach-imx/clk-imx31.c > @@ -130,7 +130,8 @@ int __init mx31_clocks_init(unsigned long fref) > clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2"); > clk_register_clkdev(clk[pwm_gate], "pwm", NULL); > clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); > - clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc"); > + clk_register_clkdev(clk[ckil], "rtc", "imx21-rtc"); > + clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc"); > clk_register_clkdev(clk[epit1_gate], "epit", NULL); > clk_register_clkdev(clk[epit2_gate], "epit", NULL); > clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0"); This should probably go in a separate patch so that Shawn can apply it. > diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c > index 09d422b..e916a91 100644 > --- a/drivers/rtc/rtc-mxc.c > +++ b/drivers/rtc/rtc-mxc.c > @@ -79,7 +79,8 @@ struct rtc_plat_data { > struct rtc_device *rtc; > void __iomem *ioaddr; > int irq; > - struct clk *clk; > + struct clk *clk_rtc; > + struct clk *clk_ipg; > struct rtc_time g_rtc_alarm; > enum imx_rtc_type devtype; > }; > @@ -373,17 +374,24 @@ static int mxc_rtc_probe(struct platform_device *pdev) > if (IS_ERR(pdata->ioaddr)) > return PTR_ERR(pdata->ioaddr); > > - pdata->clk = devm_clk_get(&pdev->dev, NULL); > - if (IS_ERR(pdata->clk)) { > - dev_err(&pdev->dev, "unable to get clock!\n"); > - return PTR_ERR(pdata->clk); > + pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); > + if (IS_ERR(pdata->clk_ipg)) { > + dev_err(&pdev->dev, "unable to get ipg clock!\n"); > + return PTR_ERR(pdata->clk_ipg); > } > > - ret = clk_prepare_enable(pdata->clk); > + ret = clk_prepare_enable(pdata->clk_ipg); > if (ret) > return ret; > > - rate = clk_get_rate(pdata->clk); > + pdata->clk_rtc = devm_clk_get(&pdev->dev, "rtc"); > + if (IS_ERR(pdata->clk_rtc)) { > + dev_err(&pdev->dev, "unable to get rtc clock!\n"); > + ret = PTR_ERR(pdata->clk_rtc); > + goto exit_put_clk; > + } > + > + rate = clk_get_rate(pdata->clk_rtc); You are getting the rate but don't you need to clk_prepare_enable()? Also, aren't those devm_clk_get now failing on i.mx35? Maybe it was already failing before that patch as I don't see any rtc clock being registeres in clk-imx35.c > > if (rate == 32768) > reg = RTC_INPUT_CLK_32768HZ; > @@ -432,7 +440,7 @@ static int mxc_rtc_probe(struct platform_device *pdev) > return 0; > > exit_put_clk: > - clk_disable_unprepare(pdata->clk); > + clk_disable_unprepare(pdata->clk_ipg); > > return ret; > } > @@ -441,7 +449,7 @@ static int mxc_rtc_remove(struct platform_device *pdev) > { > struct rtc_plat_data *pdata = platform_get_drvdata(pdev); > > - clk_disable_unprepare(pdata->clk); > + clk_disable_unprepare(pdata->clk_ipg); > > return 0; > } > -- > 1.7.4.4 > -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html