On 05/22/2015 01:48 PM, Andrew Bresticker wrote:
> On Thu, May 21, 2015 at 2:41 PM, Ezequiel Garcia
> <ezequiel.garcia@xxxxxxxxxx> wrote:
>> The Pistachio SoC provides four general purpose timers, and allow
>> to implement a clocksource driver.
>>
>> This driver can be used as a replacement for the MIPS GIC and MIPS R4K
>> clocksources and sched clocks, which are clocked from the CPU clock.
>>
>> Given the general purpose timers are clocked from an independent clock,
>> this new clocksource driver will be useful to introduce CPUFreq support
>> for Pistachio machines.
>>
>> Signed-off-by: Govindraj Raja <Govindraj.Raja@xxxxxxxxxx>
>> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
>
>> --- /dev/null
>> +++ b/drivers/clocksource/time-pistachio.c
>
>> @@ -0,0 +1,202 @@
>> +/*
>> + * Pistachio clocksource based on general-purpose timers
>> + *
>> + * Copyright (C) 2015 Imagination Technologies
>> + *
>> + * This file is subject to the terms and conditions of the GNU General Public
>> + * License. See the file "COPYING" in the main directory of this archive
>> + * for more details.
>> + */
>> +
>> +#define pr_fmt(fmt) "%s: " fmt, __func__
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clocksource.h>
>> +#include <linux/clockchips.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/sched_clock.h>
>> +#include <linux/time.h>
>> +
>> +/* Top level reg */
>> +#define CR_TIMER_CTRL_CFG 0x00
>> + #define TIMER_ME_GLOBAL BIT(0)
>> +#define CR_TIMER_REV 0x10
>> +
>> +/* Timer specific registers */
>> +#define TIMER_CFG 0x20
>> + #define TIMER_ME_LOCAL BIT(0)
>> +#define TIMER_RELOAD_VALUE 0x24
>> +#define TIMER_CURRENT_VALUE 0x28
>> +#define TIMER_CURRENT_OVERFLOW_VALUE 0x2C
>> +#define TIMER_IRQ_STATUS 0x30
>> +#define TIMER_IRQ_CLEAR 0x34
>> +#define TIMER_IRQ_MASK 0x38
>
> nit: the spacing in these two sets of #defines is inconsistent and the
> space at the beginning of the line looks a little weird to me, maybe
> just do something like this:
>
> #define REGISTER ...
> #define REGISTER_FIELD ...
>
Done.
>> +
>> +#define PERIP_TIMER_CONTROL 0x90
>> +
>> +/* Timer specific configuration Values */
>> +#define RELOAD_VALUE 0xffffffff
>> +
>> +static void __iomem *timer_base;
>> +static DEFINE_RAW_SPINLOCK(lock);
>> +
>> +static inline u32 gpt_readl(u32 offset, u32 gpt_id)
>> +{
>> + return __raw_readl(timer_base + 0x20 * gpt_id + offset);
>> +}
>> +
>> +static inline void gpt_writel(u32 value, u32 offset, u32 gpt_id)
>> +{
>> + __raw_writel(value, timer_base + 0x20 * gpt_id + offset);
>> +}
>
> Why raw iomem accessors?
>
For no good reason, it was a blind copy-paste. I'll change that to
standard accessors.
>> +static cycle_t clocksource_read_cycles(struct clocksource *cs)
>> +{
>> + u32 counter, overflw;
>> + unsigned long flags;
>> +
>> + raw_spin_lock_irqsave(&lock, flags);
>> + overflw = gpt_readl(TIMER_CURRENT_OVERFLOW_VALUE, 0);
>> + counter = gpt_readl(TIMER_CURRENT_VALUE, 0);
>> + raw_spin_unlock_irqrestore(&lock, flags);
>> +
>> + return ~(cycle_t)counter;
>> +}
>> +
>> +static u64 notrace pistachio_read_sched_clock(void)
>> +{
>> + return clocksource_read_cycles(NULL);
>> +}
>> +
>> +static void pistachio_clksrc_enable(int timeridx)
>> +{
>> + u32 val;
>> +
>> + /* Disable GPT local before loading reload value */
>> + val = gpt_readl(TIMER_CFG, timeridx);
>> + val &= ~TIMER_ME_LOCAL;
>> + gpt_writel(val, TIMER_CFG, timeridx);
>> +
>> + gpt_writel(RELOAD_VALUE, TIMER_RELOAD_VALUE, timeridx);
>> +
>> + val = gpt_readl(TIMER_CFG, timeridx);
>> + val |= TIMER_ME_LOCAL;
>> + gpt_writel(val, TIMER_CFG, timeridx);
>> +}
>> +
>> +static void pistachio_clksrc_disable(int timeridx)
>> +{
>> + u32 val;
>> +
>> + /* Disable GPT local */
>> + val = gpt_readl(TIMER_CFG, timeridx);
>> + val &= ~TIMER_ME_LOCAL;
>> + gpt_writel(val, TIMER_CFG, timeridx);
>> +}
>> +
>> +static int clocksource_enable(struct clocksource *cs)
>> +{
>> + pistachio_clksrc_enable(0);
>> + return 0;
>> +}
>> +
>> +static void clocksource_disable(struct clocksource *cs)
>> +{
>> + pistachio_clksrc_disable(0);
>> +}
>> +
>> +/* Desirable clock source for pistachio platform */
>> +static struct clocksource clocksource_gpt = {
>> + .name = "gptimer",
>> + .rating = 300,
>> + .enable = clocksource_enable,
>> + .disable = clocksource_disable,
>> + .read = clocksource_read_cycles,
>
> nit: these names are rather generic sounding, maybe add a "pistachio" prefix?
>
Sure.
>> + .mask = CLOCKSOURCE_MASK(32),
>> + .flags = CLOCK_SOURCE_IS_CONTINUOUS |
>> + CLOCK_SOURCE_SUSPEND_NONSTOP,
>> +};
>> +
>> +static void __init pistachio_clksrc_of_init(struct device_node *node)
>> +{
>> + struct clk *sys_clk, *fast_clk;
>> + struct regmap *periph_regs;
>> + unsigned long rate;
>> + int ret;
>> +
>> + timer_base = of_iomap(node, 0);
>> + if (!timer_base) {
>> + pr_err("cannot iomap\n");
>> + return;
>> + }
>> +
>> + /*
>> + * We need early syscon or late clocksource probe for this to work.
>> + */
>
> I don't think this is true... if the syscon hasn't probed yet, then
> syscon_regmap_lookup_by_phandle will probe it for us.
>
Ah, that comment is a left over from early experiments.
>> + periph_regs = syscon_regmap_lookup_by_phandle(node, "img,cr-periph");
>> + if (IS_ERR(periph_regs)) {
>> + pr_err("cannot get peripheral regmap (%lu)\n",
>> + PTR_ERR(periph_regs));
>> + return;
>> + }
>> +
>> + /* Switch to using the fast counter clock */
>> + ret = regmap_update_bits(periph_regs, PERIP_TIMER_CONTROL,
>> + 0xf, 0x0);
>> + if (ret)
>> + return;
>> +
>> + sys_clk = of_clk_get_by_name(node, "sys");
>> + if (IS_ERR(sys_clk)) {
>> + pr_err("clock get failed (%lu)\n", PTR_ERR(sys_clk));
>> + return;
>> + }
>> +
>> + fast_clk = of_clk_get_by_name(node, "fast");
>> + if (IS_ERR(fast_clk)) {
>> + pr_err("clock get failed (%lu)\n", PTR_ERR(fast_clk));
>> + return;
>> + }
>> +
>> + ret = clk_prepare_enable(sys_clk);
>> + if (ret < 0) {
>> + pr_err("failed to enable clock (%d)\n", ret);
>> + return;
>> + }
>> +
>> + ret = clk_prepare_enable(fast_clk);
>> + if (ret < 0) {
>> + pr_err("failed to enable clock (%d)\n", ret);
>> + clk_disable_unprepare(sys_clk);
>> + return;
>> + }
>> +
>> + rate = clk_get_rate(fast_clk);
>> +
>> + /* Disable irq's for clocksource usage */
>> + gpt_writel(0, TIMER_IRQ_MASK, 0);
>> + gpt_writel(0, TIMER_IRQ_MASK, 1);
>> + gpt_writel(0, TIMER_IRQ_MASK, 2);
>> + gpt_writel(0, TIMER_IRQ_MASK, 3);
>> +
>> + /* Enable timer block */
>> + __raw_writel(TIMER_ME_GLOBAL, timer_base);
>> +
>> + sched_clock_register(pistachio_read_sched_clock, 32, rate);
>> + clocksource_register_hz(&clocksource_gpt, rate);
>> +}
>> +
>> +static const struct of_device_id pistachio_clksrc_of_match[] __initconst = {
>> + { .compatible = "img,pistachio-gptimer" },
>> + { },
>> +};
>
> This table doesn't appear to be used anywhere.
>
Left over from same experiments.
>> +CLOCKSOURCE_OF_DECLARE(pistachio_gptimer, "img,pistachio-gptimer",
>> + pistachio_clksrc_of_init);
>> --
>> 2.3.3
>>
Thanks for the review!
--
Ezequiel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
